New Last updated
#143461 (Bug) Calibration on ASUS TUF Gaming F17 FX706HM_FX706HM HX003T failed created by Francesco
pmaff wrote : 20250502_213420 and so on tells me, that you are calibrating at night at 21:34:20.On my Su… New Last updated
#145073 (Bug) Error following calibration (KDE Plasma, Wayland) created by noxypaws
noxypaws wrote : Update:I installed plasma-x11-sessionand kwin-x11so I could run DisplayCAL in x11 instead … New Last updated
#144874 (Bug) Display call crash onn openning Mac mimi 2024 Sequoia created by Michael Barton
Adrian Turpin wrote : I am having the same issue on Mac OS Sequoia 15.6.1. New Last updated
#141285 (Bug) DisplayCal quit unexpectedly MacOS Sonoma 14.4.1 created by Joseph Yang
Adrian Turpin wrote : I am on Mac OS 15.6.1 and I am having the same issue. DisplayCAL crashes at the splash scr… New Last updated
#142295 (Bug) DisplayCal 3.8.9.3 crashs on start / Mac Mini M1 / MacOS Sequoia 15.1 created by CHRONIC957
A F wrote : I also have this issue New Last updated
#142862 (Bug) why are these listed as displays on my system? created by Carey
New Last updated
#140273 (Bug) Error-new_disprd failed with ‘Instrument Access Failed’ created by Danmarcar
vval wrote : I'd suggest to run msconfig.exe, select "Diagnostic startup" and then reboot and check wea… New Last updated
#141608 (Bug) I can not open the program which I use Sonoma OS with Chip M3max how to fixed this. created by Pattaraset
Pavel Ashin wrote : Sonoma 14.5 (23F79) can not open the program ( New Last updated
#142518 (Bug) The “observer” option under calibration settings is missing. created by Nelson
New Last updated
#141766 (Bug) Display Cal quit on Mac OS 14.6.1 M1 Mac Mini created by Ted Stoffers
Mateusz Fiodorow wrote : Jakieś rozwiązanie? New Last updated
#142074 (Bug) Project still using verry old Argyll created by miharix
New Last updated
#141605 (Bug) I can not open the program which I use Sonoma OS with Chip M3max how to fixed this. created by Pattaraset
New Last updated
#141464 (Bug) Unsupported Calibrite created by Angelo
New Last updated
#140183 (Bug) DisplayCAL quit on open Mac created by David Hoffman
grantmk wrote : I'm having the same crash with DisplayCAL 3.8.9.3 on macOS 14.4.1 New Last updated
#139462 (Bug) DisplayCAL quit unexpectedly created by Romualds Rubenis
Hernan Salcedo wrote : I have the same problem for over 3 months. can calibrate my monitor since then New Last updated
#140742 (Bug) My Laptop cannot detect Instrument Spyder x created by Exploreporing
New Last updated
#32927 (Bug) DiplayCAL freezes on opening or during creating a profile created by Joel H Mark
Roberto LLerena wrote : hello did you manage to solve this issue? I'm having the same thing happen, thanks New Last updated
#140033 (Feature Request) GUI has an unintuitive/confusing behavior created by The Davidtollah
New Last updated
#139460 (Bug) DisplayCAL quit unexpectedly created by Romualds Rubenis
Jörg wrote : Hello all,The same for me, I am running MacOS Sonoma 14.1.1 on a MacBook pro Retina 13" fr… New Last updated
#138511 (Bug) CG279x and i1DisplayPro – new_disprd() failed with ‘Instrument Access Failed’ error created by Clem
Clem wrote : It is working now…I have no idea why…cheers, New Last updated
#138363 (Bug) Unable to install Argyll driver created by Kolbasa
New Last updated
#36208 (Enhancement) No one here, Just move to https://github.com/eoyilmaz/displaycal-py3 created by tony-calc
Old Man wrote : That project doesn't even support windows New Last updated
#37188 (Bug) diagnostics -d parameter 1 out of range created by Antonis
Antonis wrote : I am afraid as you have probably already thought so too, it doesn't seem to be anymore s… New Last updated
#30018 (Bug) Unable to Calibrate LG38GL950-B using i1 Display Pro due to error – Your graphics drivers or hardware do not support loadable gamma ramps or calibration. You may need to update your device drivers. created by NickLaPalomento
NickLaPalomento wrote : @Roger Breton - Glad it helped! New Last updated
#39635 (Bug) issue with interactive display adjustement created by djungle
New Last updated
#39600 (Bug) DisplayCal Crashes on Windows 11 after running all patches but before finalizing profile created by ryanaz
New Last updated
#39246 (Bug) Calibrating flanders CM240 created by wragge75
New Last updated
#39131 (Bug) Cannot load 3D view : file “…[<generator object ProfileInfoFrame.view_3d.. at 0x7faa303c4970>] vs sRGB [A].wrz” does not exist created by fenugrec
New Last updated
#27717 (Bug) Error:org.freedesktop.ColorManager.NotFound Ubuntu 20.04.1 LTS created by YKar
fenugrec wrote : I ran into similar issues on archlinux with lxqt as a DE; I "solved" it by running 'xiccd'… New Last updated
#37068 (Bug) No Instrument Dropdown and Start calibration key not active created by Donald Sandholm
Shyam wrote : I am using the Windows 11 Operating platform and facing the same problem with Colormunki S… New Last updated
#39088 (Bug) display cal and Argyll on apple M1 Big Sur for Display2 xrite – MAC created by Giuseppe.miri
New Last updated
#38248 (Bug) Unable to install Argyll drivers created by abdullah hemida
gkuhns wrote : I also have this exact issue. I was able to download the file by going to that url with my… New Last updated
#38965 (Bug) displaycal -d parameter 2 out of range? created by Wolfy
New Last updated
#38216 (Bug) Displaycal can’t download and install newest version of ArgyllCMS created by Gokuo64
Alexander Becker wrote : if you reinstalland can somehow delete the cacheyou can install it againinstall usb driver… New Last updated
#38205 (Bug) https://hub.displaycal.net/issue/35661/ created by Seanra
New Last updated
#35661 (Bug) Xrite Calibrite Colorchecker display pro problem created by tomwman
Seanra wrote : I've also had this issue New Last updated
#38162 (Bug) Error – dispd-> read returned error code 2 created by Charles Daigle
New Last updated
#37206 (Bug) Diagnostic: -d parameter 1 out of range created by Rune Pedersen
rifo wrote : Hello,Did you update the Argyll CMS to the newest version? https://www.argyllcms.com/down… New Last updated
#38082 (Bug) ValueError: cannot convert float NaN to integer created by rifo
New Last updated
#37571 (Bug) Discouraged mime in Linux desktop entry created by Alberto Salvia Novella
New Last updated
#37406 (Bug) Waiting for connection 192.168.50.33:20002 created by Matthiasashford
New Last updated
#37202 (Bug) Eizo CG222W + Big Sur and Monterey + Spyder3 Pro created by Davide
New Last updated
#37200 (Bug) Eizo CG222W + Big Sur and Monterey + Spyder3 Pro created by Davide
New Last updated
#37198 (Bug) Eizo CG222W + Big Sur and Monterey + Spyder3 Pro created by Davide
New Last updated
#36843 (Feature Request) Feature request: Option to launch DisplayCAL from Profile Loader tray icon created by anthroid
New Last updated
#36163 (Bug) Python TypeError, visual whitepoint editor created by wwklnd
New Last updated
#36030 (Bug) Error Message after Start Measurement created by Charles Silverman
New Last updated
#35923 (Bug) dispread: Error – new_disprd failed with ‘Unknown calibration display type ↲ ↳ selection’ created by DAI YALI
New Last updated
#34534 (Bug) DisplayCal Profile Loader created by Uriel
Kai Andre wrote : Try starting the Profile loader with admin rights New Last updated
#34939 (Bug) DisplayCAL not working with secondary monitors created by PleaseHelp2020
New Last updated
#34929 (Bug) dispread: Error – new_disprd failed with ‘Instrument Access Failed’ created by Sergey K
New Last updated
#34537 (Bug) [Errno 8] nodename nor servname provided, or not known created by Galois
New Last updated
#34465 (Bug) Cannot view correction of monitor with similar name in colorimeter corrections database created by dogelition
New Last updated
New Last updated
#34043 (Bug) Can’t signup to forum created by displayMonkey
displayMonkey wrote : This is my email provider: https://posteo.de/en New Last updated
#33823 (Bug) Interactive adjustment display dialog disappears into black hole created by jeff slesinger
New Last updated
#33587 (Bug) error during CCSS creation created by Froller
New Last updated
#33382 (Bug) Displaycal is unable to parse the output of dispcal.exe – (this is my guess) created by rafik
rafik wrote : it is quite possible that this problem is caused by some dispcal.exe crash, as the output … New Last updated
#32937 (Feature Request) Instrument Mode created by Jose Carlos Cobucci
New Last updated
#32727 (Bug) Erroneous warning about VCGT being non-linear when creating 3D LUT created by dogelition
New Last updated
#29755 (Bug) DisplayCal does not recognize my monitor created by Dido
Seb Leitner wrote : yes, numerous reports of displays not showing up on M1 machines. also broken on Monterey. … New Last updated
#30931 (Bug) Display isn’t appearing under display tab created by Vladen32
Seb Leitner wrote : same problem on latest MBP 16" M1 pro when not connected via HDMI but USB-C or TB3 New Last updated
#27483 (Bug) Monitor not detected on M1 Mac created by Nick Giovas
Seb Leitner wrote : yes, same here. latest macbook pro 16" M1pro, external display via TB3>DP1.4. also: the re… New Last updated
#32406 (Bug) dispcal Unexpectedly Quit created by Dustin211
New Last updated
#32062 (Bug) “Judd & Voss” should be “Judd & Vos” created by dogelition
New Last updated
#31555 (Bug) parametricCurveType values should be clipped created by dogelition
New Last updated
#31550 (Bug) [ERRNO 22] Invalid Argument created by Argwin
New Last updated
#31543 (Bug) 3D Lut tool ignores abstract profies created by BrandonV
New Last updated
#31096 (Bug) Import colorimeter corrections error created by Dane Stead
New Last updated
#30569 (Bug) DisplayCal uses 1886 EOTF when choosing a gamma curve (ex: 2.4) created by Quad5Ny
New Last updated
#29550 (Bug) Can’t press Calibrate & Profile button created by Kelvininator
New Last updated
#28378 (Bug) Profile Loader not Loading created by Darren
New Last updated
#28166 (Bug) Calibration clearly not working. Screen has a distinct green tint before calibration and during the white balance dialog. created by Aaron Baker
New Last updated
#24577 (Bug) Displaycal uninstallable on Kubuntu 20.04 created by Alastair Preston
ohemelaar wrote : As a workaround you could install it using the nix package manager by just running nix-env… New Last updated
#27802 (Bug) DisplayCAL hangs on startup created by Rain Nahkur
New Last updated
#27721 (Bug) Calibration stuck on ‘computing update to calibration curves’ created by Lezz
Lezz wrote : Went into system preferences > privacy & security > full disk access and granted DisplayCa… New Last updated
#27514 (Bug) Calibration is hanging created by PeterW
New Last updated
#27479 (Bug) Profile no longer loading created by Kalwant
Kalwant wrote : Please note I can load the profile loader manually by selecting it in the start menu. It s… New Last updated
#26042 (Bug) Unable to install DisplayCal in opensuse tumbleweed created by James Moe
Tyler Ward wrote : Thought I do not use tumbleweed, I am guessing they dropped Python2 like other distros and… New Last updated
#26937 (Bug) Calibrate and profile cannot be clicked created by plushielle
New Last updated
#26643 (Bug) Profiling complete! window not showing P3 created by Howard Kim
New Last updated
#26540 (Bug) ZeroDivisionError: float division by zero created by numberonesoniafan
New Last updated
#26074 (Feature Request) Interactive Display Adjustment / White Point created by JC44
grahamh wrote : My experience is that you are going to struggle to set a target white point that's very di… New Last updated
#25735 (Bug) Completely uninstall DisplayCal – DisplayCal incompatible with i1Profiler Xrite created by Enrique
New Last updated
#25655 (Bug) Work around to install on Fedora 31 created by Michael Katzmann
Closed as Rejected Last updated
New Last updated
#25202 (Bug) Device not being detected Error \\”new_disprd failed with \\”instrument access failed\\” Colorminuki Display created by Marco Bilocca
New Last updated
#25355 (Bug) DisplayCal bug – Installing Profile is stuck created by Ryan Everett Johnson
New Last updated
#25321 (Enhancement) scRGB source colorspace support created by AstralStorm
New Last updated
#24169 (Feature Request) Force-sensor-position-in-software option created by ajaad
johnq wrote : this would be extremely helpful! New Last updated
#24828 (Bug) 3D LUTs incompatible with madvr 0.9.27 created by AstralStorm
AstralStorm wrote : Never mind. It seems that BT.2020 LUTs can only be used to process HDR content in HDR mode… New Last updated
#24844 (Bug) error new_disprd failed with instrument access failed created by Franco Sgueglia
Franco Sgueglia wrote : I have uninstalled X-Rite Software and Driver, reinstall Argyll Driver and now all seems w… New Last updated
#24840 (Bug) MST (multi stream transport) and calibration: didn’t work together created by bilbobaggins
New Last updated
#24793 (Bug) Maximum brightness is wrong created by Astronautech
New Last updated
#24759 (Bug) Colormunki does not work created by Carlo
New Last updated
#24710 (Bug) Does not find I1 device after upgrading to 3.8.9.3 (on 2 computers) created by Kenneth Evans
Kenneth Evans wrote : It looks like I used my old i1 Display 2 by mistake. It works ok with the newer ColorMun… New Last updated
#24690 (Bug) No se activa el boton de Calibrar y Perfilar created by ismaferi
New Last updated
#24584 (Bug) Display CAL will not acknowledge my monitor created by Heather K
Brittney M wrote : i'm also getting the same issue and have no idea what to do... New Last updated
#24553 (Bug) When Audio/Sound fails to play, DisplayCal issues segfault created by Roger
New Last updated
#24223 (Bug) “Unmet dependencies:” Ubuntu 18.04 created by UNO CASTILLO
Sebi wrote : #### YaST2 conflicts list - generated 2020-04-22 15:29:40 ####
python2-psutil benö…