Whitepoint difference after calibration

Home › Forums › Help and Support › Whitepoint difference after calibration

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2018-01-31 at 14:27 #10293

    Ocirne94
    Participant
    • Offline

    Hello all,

    I’m using a ColorHug2 and DisplayCAL to calibrate my laptop monitor. Everything seems to work pretty well (the calibrated output isn’t much different from the default), but the verification measurement report states a “Measured vs. assumed target whitepoint ΔE*00” of 15, quite far from the nominal range of 0-2.

    I’ve tried googling the issue without much luck: can someone help me please?

    Attached is the measurement report.

    Thank you in advance

    Ocirne

    Attachments:
    You must be logged in to view attached files.
    2018-02-03 at 17:41 #10327

    Florian Höch
    Administrator
    • Offline

    Hi,

    “Measured vs. assumed target whitepoint ΔE*00” of 15, quite far from the nominal range of 0-2.

    This means the measured whitepoint is quite far from the daylight locus. See also the FAQ.

    2018-02-03 at 18:00 #10328

    Ocirne94
    Participant
    • Offline

    Hi, thanks for your answer.

    I had read the FAQ, but I can’t find there an explanation for why this happens and what I can do about it.

    I’ve found this topic (https://hub.displaycal.net/forums/topic/need-help-interpreting-first-calibration/), I will try to follow the suggestions there too.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.

Log in or Register

Display Calibration and Characterization powered by ArgyllCMS