- This topic has 69 replies, 5 voices, and was last updated 4 years, 11 months ago by
.
-
Posts
-
Could not find platform independent libraries
Could not find platform dependent libraries <exec_prefix>
Consider setting $PYTHONHOME to [:<exec_prefix>]
wxPython 3.0.2.0
Displays: iMac15,1 @ 0, 0, 2560×1440 [PRIMARY]:Web @ localhost:madVR:Prisma:Resolve:Untethered
Match? (u’2560′, u’1440′)
Display 0 size (mm) (599, 340)
size.measureframe 427.0
dimensions.measureframe 0.405348047538,0.275080906149,0.47775175644
pattern_geometry x y w h area (0.3730468749998347, 0.23611111111124794, 0.07968749999995313, 0.14166666666658334, 0.011289062499986721)
Nicks-iMac:~ Nick$
Could not find platform dependent libraries <exec_prefix>
Consider setting $PYTHONHOME to [:<exec_prefix>]
These two are not normal. Do you have any non-standard software installed via (e.g.) MacPorts or Homebrew?
Output after closing the measurement window is missing.
I ran an uninstall script for HomeBrew and MacPorts:
Could not find platform independent libraries
Could not find platform dependent libraries <exec_prefix>
Consider setting $PYTHONHOME to [:<exec_prefix>]
wxPython 3.0.2.0
Displays: iMac15,1 @ 0, 0, 2560×1440 [PRIMARY]:Web @ localhost:madVR:Prisma:Resolve:Untethered
Match? (u’2560′, u’1440′)
Display 0 size (mm) (599, 340)
size.measureframe 427.0
dimensions.measureframe 0.405348047538,0.275080906149,0.47775175644
pattern_geometry x y w h area (0.3730468749998347, 0.23611111111124794, 0.07968749999995313, 0.14166666666658334, 0.011289062499986721)
Nicks-iMac:~ Nick$
Attach the log of a calibration attempt please. Make the patch window as small as possible, connect Resolve, start measurement, after the initial measurements, cancel.
I will chime in Florian and SynchroFilms. I am also seeing the same actions described in the software.
Been using DisplayCal with no issues the last year. Recently hooked up my grading monitor after business on the road the last few months and when calibrating the square fills the screen of my grading monitor, I no longer see a white square in my Davinci Resolve UI and the grading monitor never flashes white. When I run calibration it fails every time. The controls are very wonky on my monitor as well and the colors change in the opposite directions as SynchroFilms described.
Particulars:
MacBook Pro 2018 / macOS Mojave / Resolve 15 / X-Rite i1
Thanks-
PaulYeah very weird because that has never happened. I thought I was going crazy, ha! When the “correct settings” are set to the colorimeter the screen is very green and bright, so I just had to adjust the monitor by eye and finish the project.
I tried running Resolve versions 15/15 Studio/16/16 Studio all with the same results.
From the log:
DisplayCAL: Sending RGB 0.500 0.500 0.500, background RGB 0.220 0.220 0.220, x 0.4594, y 0.4306, w 0.0797, h 0.1417So, the correct values are being sent (width and height are equivalent to a pattern area of roughly 1%, or 153×153 pixels at FullHD res, about the smallest possible usable size for the patch window). Are you using the correct interface in Resolve (“Color” tab, menu “Workspace” -> “Calibration” -> “SpectraCAL CalMAN”)?
Are you using Resolve 16 Beta? Maybe DaVinci have broken something on Mac in the latest update?
