I bought an i1Display Pro and everything changed in calibration. 🙂
I was in doubt, since with this calibrator I don’t have the LCD White Led option, just having only LCD (generic), how should I do the calibration correctly?
Should I use Correction’s?
I did two tests, one in High with i1 DisplayPro correction that I downloaded to my…[Read more]
Thank you so much again for all the tips.
I detected that the Mac Os Catalina was recognizing the monitor as 10 bits instead of 8 bits, I fixed the problem and still the gray scale you sent was not close to being perfect.
After research, I saw that another common mistake of the last operating system, is not using the RGB system for the…[Read more]
I was visualizing the range of ashes you had talked about previously, and it looks really bad, even in photoshop despite improving a bit.
I tried it on macbookpro and it is perfect from the start, without calibration.
Out of curiosity, I connected the BenQ monitor to my girlfriend’s PC, which has Windows 10, and to my amazement, the ash range…[Read more]
On my old Dell 2209WA monitor I calibrated in slow mode with 79 Testchart profiles, and the results were better.
As for windows and mac, I only have windows, so I can’t try on windows. : |
On mac I always have everything off, before calibrating.
I chose to calibrate in M this time, because it still takes 3H, the spyder is very…[Read more]
I recently purchased two BenQ PD2500Q, and after calibrating with Spyder 5, and after several tests, I can never get “OK OK” on the gray scale.
When calibrating the MacbookPro it gives the values all correct.
LCD WHITE LED
White level 100cd / m2
Tone curve Gamma…[Read more]