Win10 + DisplayCal 3.6 + Huey

Home Forums Help and Support Win10 + DisplayCal 3.6 + Huey

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #12821

    Carlos Lopez Sanahuja
    Participant
    • Offline

    I can’t get working this hardware. I have installed with Driver Signature Off and it’s OK. But when i try to profile

    I attach full log and partial here

    22:14:52,239 icoms_usb_control_msg: type 0x21 req 0x9 size 8
    22:14:53,023 icoms_usb_control: returning ICOM err 0x200
    22:14:53,025 huey_command: command send failed with ICOM err 0x200
    22:14:53,025 init_inst returned ‘Communications failure’ (Communications failure)
    22:14:53,025 new_disprd failed because init_inst failed
    22:14:53,026 icoms_del: called
    22:14:53,026 icoms_del: closing port
    22:14:53,026 usb_close_port: called
    22:14:53,026 usb_close_port: usb port has been released and closed
    22:14:53,026 dispcal: Error – new_disprd() failed with ‘Instrument Access Failed’

    Attachments:
    You must be logged in to view attached files.
    #12830

    Florian Höch
    Administrator
    • Offline

    Hi,

    have you tried different USB port(s)? Does the instrument work with the vendor software?

    #12840

    Carlos Lopez Sanahuja
    Participant
    • Offline

    Huey 1.0.5 doesn’t work with Windows 10. I have tried all ports

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.

Log in or Register

Display Calibration and Characterization powered by ArgyllCMS