- This topic has 11 replies, 3 voices, and was last updated 6 years, 6 months ago by .
Viewing 12 posts - 1 through 12 (of 12 total)
Viewing 12 posts - 1 through 12 (of 12 total)
Home › Forums › Help and Support › Spyder 2 oeminst problem
Trying to install my Spyder 2 on Mac, running OSX El Capitan.
I have original CD and Spyder software but Display cal will not find or load PLD file and asks if I’ve run oeminst.
oeminst gives the following message:
Last login: Wed Sep 27 09:20:19 on ttys000
RICHARDsMini728:~ richardbendall$ /Users/richardbendall/Downloads/Argyll_V1.9.2/bin/oeminst ; exit;
mount_cd9660: Permission denied
oeminst: Error –
Mounting ISO9660 volume of CDROM failed with 256
logout
Saving session…
…copying shared history…
…saving history…truncating history files…
…completed.
Obviously, something is stopping it accessing the files on the CD. How do I fix this?
Many thanks
Richard
I recommend using the automatic import in DisplayCAL.
Thanks Florian, that’s what I did. Also tried using import file function from CD, spyder2 express software file and a spyd2pld.bin file I found online. None of it has worked.
I’ve attached screenshots to show what happens….
Getting very frustrated – any help welcomed
Many thanks
Richard
Well, that makes no sense because the firmware seems to have been imported successfully. Check ~/Library/Application Support/ArgyllCMS/spy2pld.bin
Hi Florian
Just looked in ~/Library/Application Support/ArgyllCMS and there is no “spy2pld.bin” there, though plenty of other files relating to the spyder 2 instrument. I’ve attached a screenshot of all relevant files. Any idea what’s wrong or how I can fix it?
Regards
Richard
I would need the log output after trying to enable the Spyder2 in DisplayCAL.
Tell it where the setup(.exe) file is: oeminst /path/to/file
Thanks for taking the trouble, Florian. The log is attached.
Regards
RICHARD
Thanks, but I meant directly after running “Tools” -> “Instrument” -> “Enable Spyder2”, so that the logfile contains the complete oeminst output as well.
That was very quick, Florian.
I’ve done as you said, file attached.
Regards
R
Please delete/move the “Spyder2express 2.2” folder from Applications and try again.
That’s fantastic Florian, finally seems to be working!
Many thanks
Richard