Spectral Correction for 2 ASUS Proart Displays

Home Forums Help and Support Spectral Correction for 2 ASUS Proart Displays

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #34689

    AL2420
    Participant
    • Offline

    Could you tell me the correct spectrals to use for ASUS PA148CTV and ASUS PA 279CA displays?

    These are listed as IPS LED backlight monitors on the ASUS site.  the 148 is 8-bit and the 279 allegedly 10-bit.  Using an XRite Display Pro.

    Thank you!

    Attachments:
    You must be logged in to view attached files.
    #34702

    Vincent
    Participant
    • Offline

    Search online, if not found, search on community database for CCSS (not CCMX)

    if not found select no correction and measure RGB primaries, then using bundled corrections:
    -if primaries are sRGB-like they should be common WLED  (white LED IPS)
    -if primaries are P3-Like trye some of the WLED PFS (excluding HP Z24x one)
    -if primaries have AdobeRGB green and P3 red try WLED PFS HP Z24x G2.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.

Log in or Register

Display Calibration and Characterization powered by ArgyllCMS