Error: Argyll CMS xicclu: Invalid white XYZ

Home › Forums › Help and Support › Error: Argyll CMS xicclu: Invalid white XYZ

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2024-05-17 at 11:06 #141316

    Jaakko Oksa
    Participant
    • Offline

    I get this error message and calibration fails. Calibration has worked previously. Any ideas?

    Attachments:
    You must be logged in to view attached files.
    2024-05-17 at 12:50 #141320

    Vincent
    Participant
    • Offline

    There should be a log file where that .cal file is located.

    2024-05-18 at 0:05 #141328

    Jaakko Oksa
    Participant
    • Offline

    I can find a .cal file (with a matching timestamp) in this directory:
    C:\Users\jaakk\AppData\Roaming\DisplayCAL\storage\
    The .cal file is named P32u-10 #1 2024-05-17 11-30 D6500 2.2 F-S XYZLUT+MTX.cal
    There are two .log files in this directory:
    0_16.log
    P32u-10 #1 2024-05-17 11-30 D6500 2.2 F-S XYZLUT+MTX.log
    What kind of information should I be looking for?

    Btw, I rebooted the machine and was able to complete the calibration successfully. I can see two possible causes for the error:
    – The error was fixed by rebooting the machine.
    – The error was caused by light leaking into the colorimeter from ambient light, because I made the subsequent successful measurement when it was dark.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.

Log in or Register

Display Calibration and Characterization powered by ArgyllCMS