self check report – display update delay

Home Forums Help and Support self check report – display update delay

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #33687

    fingerfeet
    Participant
    • Offline

    Hi guys

    Where on the self check report is the display update delay – average and peak results?

    Below is some info from the report which that I can only guess is data I need?

    And lastly, if I am creating a 3D LUT for resolve (following the instructions provided on here (https://hub.displaycal.net/wiki/3d-lut-creation-workflow-for-resolve/) do my results fall within the suggested  parameters of not much higher than 0.5 DE average and 5 DE peak?

    Average ΔE*00<= 1.5<= 1   0.04 RESULT OK ✔✔

    Maximum ΔE*00<= 4<= 3104  1.16 RESULT OK ✔✔

    see attached jpeg for full basic info and summary in the report.

    Many thanks

    Attachments:
    You must be logged in to view attached files.
Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.

Log in or Register

Display Calibration and Characterization powered by ArgyllCMS