RGB profile in YPbPr mode?

Home Forums Help and Support RGB profile in YPbPr mode?

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #28181

    Ribald Eddie
    Participant
    • Offline

    From what I’ve heard about calibrating monitors hooked up to an M1-based Mac, I’m supposed to create a profile on a non-M1 based machine and then copy that over to the M1 based Mac.  I’ve done that, but I realized that the non-M1 based Mac is connecting to the monitor in RGB mode rather than in YPbPr mode, while the M1-based Mac seems to always use the YPbPr mode.

    Can I trust the profile to work properly on the M1 based Mac?

    Truth be told, when I try to validate the profile on the M1 based Mac using the Verification step in DisplayCAL,  I get a poor result– but I  have no way of knowing if this is related to the use of the browser instead of the native window on M1 Macs.

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.

Log in or Register

Display Calibration and Characterization powered by ArgyllCMS