Projector Calibration

Home Forums Help and Support Projector Calibration

This topic contains 2 replies, has 2 voices, and was last updated by  tung.pham (@tung-pham) 7 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #16437

    tung.pham (@tung-pham)
    Participant
    • Offline

    Hello.

    I am using i1 Display Pro instrument and Display Cal to run a calibration service in my city. Today I just got a request to do calibration on a projector, I tried to do a quick search here and from what I read, the process is pretty much the same as it on monitor, the only different is I need to point my instrument to the wall which the projector shows instead right? The distance from my instrument and the wall should be around 1 meter?

    Anything I need to change in the settings? Like corrections or anything.

    Thanks for reading and taking your time to help me, have a good day (:

    i1Display Pro on Amazon  
    Disclosure: As an Amazon Associate I earn from qualifying purchases.

    #16440

    Florian Höch (@fhoech)
    Administrator
    • Offline

    Hi,

    the only different is I need to point my instrument to the wall which the projector shows instead right? The distance from my instrument and the wall should be around 1 meter?

    That sounds reasonable.

    Anything I need to change in the settings? Like corrections or anything.

    There’s a projector correction (HP Marantz Panasonic).

    #16450

    tung.pham (@tung-pham)
    Participant
    • Offline

    Thanks Mr.Hoch, I will try to do it once the other side can arranges his schedule.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.

Log in or Register

Display Calibration and Characterization powered by ArgyllCMS