-
AnonymousInactive
Hi
i just got an OLED and tried putting in the correction values for the OLED profile but when i load it and start calibrate a window comes up
The selected colorimeter correction is not suitable for the selected instrument.
i use Four Colour matrix
i send the file so you can have a look at it
Hi,
the file is malformed. There are four lines in the DATA section, it should contain only three (3 rows x 3 columns). INSTRUMENT is repeated and DISPLAY is missing.
AnonymousInactive
Didnt see it when i opend it in windows with notepad.
So its just that “minus” letter that are in the wrong row ?
It should be easy to fix.
I opend the file on my tablet now btw
AnonymousInactive
it worked when i opended it in wordpad and adjusted the row
btw Florian
Should i use Refresh or LCD type for display with the OLED?
OLED are usually non-refresh displays (you need to set DISPLAY_TYPE_REFRESH in the CCMX to “NO” and DISPLAY_TYPE_BASE_ID to “1”).
AnonymousInactive
ok great thanks
lets see what this tv can do with a 3D LUT calibration 🙂
Display Calibration and Characterization powered by ArgyllCMS