Possible to measure brightness with i1display pro plus

Home Forums General Discussion Possible to measure brightness with i1display pro plus

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #31766

    BBBLove
    Participant
    • Offline

    I would like to measure the brightness nit.

    is it possible to do it with i1display pro plus?

    I was trying to find the option, but couldn’t find it.

    Calibrite Display Plus HL on Amazon   Calibrite Display Pro HL on Amazon  
    Disclosure: As an Amazon Associate I earn from qualifying purchases.

    #31767

    Kuba Trybowski
    Participant
    • Offline

    In both DisplayCAL and CC Profiler/i1 Profiler there’s a brightness measurement step at the beginning of the calibration process. Additionaly, the latter has a standalone screen uniformity check.

    #31799

    Алексей Коробов
    Participant
    • Offline

    Kuba, DisplayCAL also has uniformity check that is implementated better, find it in reports. It is used on many Internet test benches.

    2BBBLove: Argyll CMS (DisplayCAL engine) has “spotread” command for advanved color measuremend (brightness measurement too), but it’s more difficult to use. Kuba offered the most easy way. You can can measure screen brightness ans ambient level in both programs as pre-calibration parameters. Note, 1 nit = 1 cd/sq.m

    #31800

    Kuba Trybowski
    Participant
    • Offline

    Thanks. 🙂

    I will try it.

    #31816

    BBBLove
    Participant
    • Offline

    Thanks both of you for these great information!

    I will try it.

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.

Log in or Register

Display Calibration and Characterization powered by ArgyllCMS