MAG271C and X-Rite i1Display Pro

Home Forums Help and Support MAG271C and X-Rite i1Display Pro

This topic contains 2 replies, has 3 voices, and was last updated by  Florian Höch (@fhoech) 3 weeks, 4 days ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #20134

    Khaled (@khaled)
    Participant
    • Offline

    Hello.

    I know little to nothing about calibrating and Im trying to get 150cdm and D65 with this monitor but I always end up with very bad result. Any Idea what am I doing wrong?

    Attachments:
    You must be logged in to view attached files.
    #20140

    Jbennett360 (@jbennett360)
    Participant
    • Offline

    I had the MAG271CQR and ended up sending it back.

    It couldn’t be calibrated and suffered from horrendous banding.

    #20155

    Florian Höch (@fhoech)
    Administrator
    • Offline

    You are checking the uncalibrated monitor vs Rec. 709. That is likely not what you want. Disable “use simulation profile as display profile” on the verification tab.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.

Log in or Register

Display Calibration and Characterization powered by ArgyllCMS