MadVr SDR BT2020

Home Forums General Discussion MadVr SDR BT2020

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #36257

    Christian Sohlberg
    Participant
    • Offline

    Trying to create a 3dlut with Displaycal for HDR to SDR BT2020 using Madvr.

    Not sure about the settings though.

    The MadTPG window always says “BT709” regardless of what the setting under
    the calibration tab are set to…

    The settings under the calibration tab are the follwing:

    – “This display is already calibrated”
    – “The display is calibrated to the following primaries/gumut: BT.2020”
    – “Report BT.2020 to display”

    The display changes to BT.2020 but the actual MadTPG window still reports
    BT.709.

    Is this a bug, or am I doing something wrong?

    Attachments:
    You must be logged in to view attached files.
    #36269

    Vincent
    Participant
    • Offline

    Just use the display profile you have for SDR Rec709. It only captures uncalibrated display behavior (NATIVE GAMUT) + optional grey calibration for neutral grey.

    Then make LUT3D, Rec2020 “in” and whatever TRC you want (2.2 is expected by default ion madVR to run HDR to SDR shaders), display native gamut SDR profile “out”.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.

Log in or Register

Display Calibration and Characterization powered by ArgyllCMS