Issues Calibrating a Dell s2721dgfa

Home Forums Help and Support Issues Calibrating a Dell s2721dgfa

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
  • #31487

    Steve Watt
    • Offline


    Trying to calibrate my Dell S2721 DGFA. Im using  a Colormunki display which I have used on other monitors with no issue.

    Main issues are if I calibrate in the wide gamut I cant adjust the color and brightness in the monitor due to the HDR locking those off. No issue, I just do th the Nvida control panel. I then let the calibration run but at the end, while I get great delta levels the color coverage is saying its terrible giving only around 53% of PCI3.

    Any advice? Other than turn off HDR?

    i1Display Studio on Amazon  
    Disclosure: As an Amazon Associate I earn from qualifying purchases.


    Kuba Trybowski
    • Offline

    If HDR doesn’t allow you to adjust the brightness and RGB values, you must disable it.

    It’s entirely possible that your display simply has a low coverage of the DCI-P3 gamut.


    • Offline

    That monitor is not HDR, it has just a translator from HDR signal to SDR p3 panel+backlight capabilities, hence it has no use enabling it.

    For watching HDR content use a software converter since it can be configured (madVR with DisplayCAL)

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.

Log in or Register

Display Calibration and Characterization powered by ArgyllCMS