Interactive Display Measurement

[bitfidelity]

Is there a way to use the Interactive Display Measurement to quickly check a pre-existing calibration/profile? The IDM is normally accessed by beginning a calibration, but the video card gamma table is reset when it is active.

[Florian Höch]

Look on the verification tab.

[bitfidelity]

Sorry, I do not see it. The verification tab only seems to involve testcharts; what I want is the “Interactive display measurement” tool under the calibration tab.

[Florian Höch]

That should be suitable for a quick check. There’s also “Report on calibrated device” in the “Tools” menu.

[Author]

Posts