imac 2011 – White point change back to original

Home Forums Help and Support imac 2011 – White point change back to original

This topic contains 1 reply, has 2 voices, and was last updated by  Florian Höch 2 months, 2 weeks ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #15638

    Dimitri
    Participant
    • Offline

    Hello

    I’m trying to calibrate an imac 2011 with Displaycal ( insane soft btw good job ) and a colormunki x-rite.
    The calibration and profiling went well and a good profile has been created.

    There is the problem.
    I’ve run the Interactive Display Adjustment to test the new profile. It’s alright but the new profile doesn’t stay on. The white point is correct for few seconds then shift to the original white point.
    My RGB value are balanced for few seconds then shift to the original setting.

    It’s not for professional use however I’m very curious to know what trickery is going on behind that screen.

    Regards

    #15660

    Florian Höch
    Administrator
    • Offline

    I’ve run the Interactive Display Adjustment to test the new profile. It’s alright but the new profile doesn’t stay on.

    It isn’t supposed to. Use verification if you want to check your current profile.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.

Log in or Register

Display Calibration and Characterization powered by ArgyllCMS