Help with this report :)

Home › Forums › Help and Support › Help with this report :)

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 2018-12-12 at 14:14 #14868

    Iván Martín
    Participant
    • Offline

    Hi there!

    I’ve got this measurement report from DisplayCAL + i1 DisplayPro and I was wondering if it’s correct or not.

    Could you help me, plz?

    Thanks in advance.

    Attachments:
    You must be logged in to view attached files.

    Calibrite Display Pro HL on Amazon  
    Disclosure: As an Amazon Associate I earn from qualifying purchases.

    2018-12-14 at 6:39 #14881

    Florian Höch
    Administrator
    • Offline

    Looks fine to me (very good result actually).

    2018-12-17 at 13:18 #14911

    Iván Martín
    Participant
    • Offline

    Thanks Florian!!!

    2018-12-28 at 21:48 #14981

    Mark Walter
    Participant
    • Offline

    Hi there,

    I also wanted to know if the result is OK, as I don’t quite understand the Measured vs. assumed target whitepoint ΔE.

    All the best
    Mark

    Attachments:
    You must be logged in to view attached files.
  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.

Log in or Register

Display Calibration and Characterization powered by ArgyllCMS