- This topic has 2 replies, 2 voices, and was last updated 9 years ago by
.
-
Posts
-
Hello,
I’ve been using DisplayCal 3.1.7.2 successfully since November 2016 with my Spyder5 Pro and then believe I made a mistake downloading the Spyder 5 software and installing it on my Windows 10 computer to enable the additional measurement modes so they could be imported by DisplayCal. Since doing this, I believe the driver for the Spyder is now Datacolor and not ArgyllCMS because DisplayCal cannot identify the Spyder anymore. Is there a way to enable the ArgyllCMS driver again without having to uninstall or reinstall software? Thank you for any help you can provide.
Hi,
you can switch drivers (provided the correct ones were already installed at one point) using Windows device manager. The process is detailed in the documentation. If you want to do it the easy way, you can also just use “Tools” -> “Instrument” -> “Install Argyll instrument drivers” in DisplayCAL to re-install the correct driver.
Hi,
you can switch drivers (provided the correct ones were already installed at one point) using Windows device manager. The process is detailed in the documentation. If you want to do it the easy way, you can also just use “Tools” -> “Instrument” -> “Install Argyll instrument drivers” in DisplayCAL to re-install the correct driver.
Thank you very much for your response. I got it to recognize the Argyll driver.
