Got .txt files instead of Monitor LUT .cube

[Ja Ki]

Hi

So I tried calibrating an external Reference Monitor at work (sony lmd 2451w, no idea if this is even color accurate?) with DisplayCal and Spectracal CALMan inside Resolve.

After the whole procedure I wanted to save the LUT for the screen, but instead I got several text files that I have no idea how to use them.

What’s happening here? I’m very confused!

Attachments:

You must be logged in to view attached files.

[Florian Höch]

Hi,

did you use the “3D LUT for Resolve” preset in DisplayCAL? If not, you need to change the 3D LUT format on the 3D LUT tab to *.cube (disable “Create 3D LUT after profiling” to be able to re-create the 3D LUT with the existing profile, no need for new measurements),

[Ja Ki]

This is what I forgot. I didn’t check the 3D LUT Tab.

I’m not at work anymore, but I’ve got the .txt files with me. Is it possible to create a .cube at home?

Just opened up DisplayCAL on my laptop but I have no idea what to do with these .txt files now

Or do I need the .icc it created as well?

• This reply was modified 5 years, 1 month ago by Ja Ki.

[Florian Höch]

Yes, you need the icm file (the one shown under “Settings”).

[Ja Ki]

I’m getting the .icc file sent over, I’ll try my best then at home

[Ja Ki]

Great! It worked! Thank you so much!

[Author]

Posts