good calibration result but 1 nasty spike at "navy"

[t.g.v]

Dear Florian,

update to v 3.5 worked wo. any problem. when doing some runs, I realized that total running time  has decreased 😉

my last results are quite appealing for me (blacks, contrast, delta es) – but there is one nasty spike at navy-blue. Is there any chance to compensate my monitors anomaly?

regards – TG

ASUS PB 248Q plus RX-550. Spyder 5 (express)

• This topic was modified 6 years, 2 months ago by t.g.v.

Attachments:

You must be logged in to view attached files.

[Florian Höch]

sRGB blue out of gamut for your display is the most probable cause.

[t.g.v]

…

i assume there is no workaround for that  (altering dispcal-settings, going for a 3D-LUT?)

regards – TG

[Florian Höch]

i assume there is no workaround for that (altering dispcal-settings, going for a 3D-LUT?)

It’s a display hardware limitation. You may be able to get a slightly better result with the default profile type (XYZ LUT+matrix).

[t.g.v]

thankyou – that has worked.

[Author]

Posts