-
HI all.
Using a colormunki with the AD27QD.
Gone for D65 and 2.2 Gamma. Left the Gamma mode at 3 on the monitor. Adjusted the RGB values and calibrated Aiming for 140cdm. I normally go for 120cdm.
Why can i never hit the 6500K for my brightness on the Correlated Color Temperature. It’s always 6700-7000? No matter the brightness i calibrate to etc.
Here’s my verification Measurement report. Guess things are fine as they are?
-
This topic was modified 4 years, 8 months ago by Jbennett360.
Attachments:
You must be
logged in to view attached files.
Hi,
not sure what you mean. The report shows 6500K(+-).
Apologies.
I totally misread the report. I realised afterwards.
Hi,
not sure what you mean. The report shows 6500K(+-).
Any suggestions on what Color Correction file to use? Or should i just leave it as ‘None’?
WLED PFS Phosphor ~95% P3
WLED PFS Phosphor ~95% P3
I’ve got the following options available?
View post on imgur.com
Guessing it would be the 94% P3 – Panasonic?
-
This reply was modified 4 years, 7 months ago by Jbennett360.
-
This reply was modified 4 years, 7 months ago by Jbennett360.
Yep, closest one.
Noticed there’s a CCSS now for the AD27QD. Would it be worth using that instead?
Display Calibration and Characterization powered by ArgyllCMS