- This topic has 4 replies, 2 voices, and was last updated 4 years, 1 month ago by .
Viewing 5 posts - 1 through 5 (of 5 total)
Viewing 5 posts - 1 through 5 (of 5 total)
Home › Forums › Help and Support › display cal settings?
hi I used display cal to calibrate my Benq GC2870 with a color munki display on windows 10 (amd RX 580 GPU), chose the sRGB preset from settings and got a good report.
but im not sure if that preset was the best option to chose as the display clams to be wide gamut.
is there a better preset to use?
hoping to use light room CS6
Thanks
Calibrite Display SL on Amazon
Disclosure: As an Amazon Associate I earn from qualifying purchases.
hi I used display cal to calibrate my Benq GC2870 with a color munki display on windows 10 (amd RX 580 GPU), chose the sRGB preset from settings and got a good report.
but im not sure if that preset was the best option to chose as the display clams to be wide gamut.
is there a better preset to use?
hoping to use light room CS6
Thanks
My monitor is also wide gamut, the important things are: to select a proper correction for the display, and to use gamma 2.2 relative. sRGB is fine. Also aim for 80-120 nits.
Thanks a lot for the help!
Ill set it up in the morning.
it’s a tad confusing to start with so much in the way of options and the more i touch them the more likely ill brake something so relay cool if that’s all ill need to do.
I left the brightens down to 50 nits as i like my display less bright, if i do anything important ill make a second calibration at 80 nits.
Delta E seems relay good & gamut coverage seems fairly good.
I used a user submitted correction for my display, I hope that was good.
Thanks for the help
I left the brightens down to 50 nits as i like my display less bright, if i do anything important ill make a second calibration at 80 nits.
Delta E seems relay good & gamut coverage seems fairly good.
I used a user submitted correction for my display, I hope that was good.
Thanks for the help
Looks good. đŸ™‚