Different results using SpyderX on Windows and Mac?

[Art Mazur]

I have a MSI Optix MAG274QRF-QD monitor which is connected to a Win10 desktop via display port. I also connect my 16in Macbook Pro, over HDMI and I flip between the Mac and PC systems depending on what I’m doing. I used the SpyderX pro along with DisplayCal to generate a color profile for both Windows and Mac, but got completely different  results under each OS.

On the Mac side that monitor is reported as 100%sRGB, 100%Adoble RGB, and 96% PCI P3. This matches up with the manufactures specifications for the monitor.

However on the PC side, Displaycal only shows 97.5% sRBG, 90.6% AdobeRGB, and 88.2 DCI P3. What’s going on here? Is this a bug in DisplayCal, or is this an issue with color settings in my Nvidia control panel?

Attachments:

You must be logged in to view attached files.

SpyderX Pro on Amazon  
Disclosure: As an Amazon Associate I earn from qualifying purchases.

[Vincent]

Check if contrast has changed, that will point to HDMI range mismatch. Also make sure you are using the same colorimeter correction.

[Author]

Posts