DCI-P3 and SMPTE 3dLut

Home Forums Help and Support DCI-P3 and SMPTE 3dLut

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #5044

    adolfotregosa
    Participant
    • Offline

    There seams to be something wrong with dci-p3 madvr 3dlut. The produced 3dlut are not accepted by madvr when tone curve is set to smpte 2084.

    The verification of dci-p3 also gives me really odd results. I also noticed that the “disable 3dlut” on madvr is not in sync with the “enable 3d lut” on the verification tab. I have to do it manually.

    What I’m I doing wrong?

    Thank you

    Attachments:
    You must be logged in to view attached files.
    #5051

    adolfotregosa
    Participant
    • Offline

    “enable 3d lut” is now working .. :S ?? magic

    #5060

    Florian Höch
    Administrator
    • Offline

    The produced 3dlut are not accepted by madvr when tone curve is set to smpte 2084.

    It is currently not possible to verify SMPTE 2084 using the built-in verification feature.

    I also noticed that the “disable 3dlut” on madvr is not in sync with the “enable 3d lut” on the verification tab.

    It’s not supposed to be – only while running measurements.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.

Log in or Register

Display Calibration and Characterization powered by ArgyllCMS