Home › Forums › Help and Support › colormunki photo : dispread.exe stops !
- This topic has 3 replies, 2 voices, and was last updated 6 years, 1 month ago by dr rotule.
-
AuthorPosts
-
2018-03-11 at 15:34 #11034
Hello,
After numerous attempts, I finally come here to request your help.
I use Win10-64 and a colormunki photo probe aimed towards my projector screen (hdmi). DisplayCAL window being on a second screen (DVI).
I do not use :
– allow skipping self test
– high resolution
– adaptative modeWhen I launch the profiling using 175 patches, it starts well, does plenty of snapshots (I won’t be able to tell if it is actualy 175, but looks like), and after a while, it stays stuck on a whitish pattern from madTPG, and when I switch back on my second screen, it shows a laconic Windows pop-up :
“dispread.exe s’est arrêté” which means dispread.exe has stopped.What would you suggest ?
Calibrite ColorChecker Studio on Amazon
Disclosure: As an Amazon Associate I earn from qualifying purchases.2018-03-11 at 15:50 #11038Here is the log of my last attempt :
14:54:26,934 Session log: madVR 2018-03-11 14-52 D6504 S XYZLUT
14:54:26,936
14:54:26,989 Connected to madVR version 0.92.12.0 (C:\Program Files\madVR\madHcNet32.dll)
14:54:27,003 Pattern area: 100%
14:54:27,005 Background level: 28%
14:54:27,006 Background mode: APL linear
14:54:27,007 Border width: 20 pixels
14:54:27,609
14:54:27,611 Répertoire de travail :
14:54:27,614 c:\
14:54:27,615 users\
14:54:27,615 nobody\
14:54:27,617 appdata\
14:54:27,618 local\
14:54:27,618 temp\
14:54:27,619 DisplayCAL-pqok8t\
14:54:27,621
14:54:27,622 Ligne de commandes :
14:54:27,624 C:\Argyll_V2.0.0\bin\dispread.exe
14:54:27,625 “-P0.5,0.5,10.000000”
14:54:27,625 -v
14:54:27,627 -dmadvr
14:54:27,628 -c1
14:54:27,628 -yl
14:54:27,630 -YA
14:54:27,631 -K
14:54:27,631 “madVR 2018-03-11 14-52 D6504 S XYZLUT.cal”
14:54:27,632 -s
14:54:27,634 “madVR 2018-03-11 14-52 D6504 S XYZLUT”
14:54:27,634
14:54:28,375 DisplayCAL: Starting interaction with subprocess
14:54:28,381 Number of patches = 175
14:54:28,382 Setting up the instrument
14:54:28,384 Instrument Type: ColorMunki
14:54:28,384 Serial Number: 2079993
14:54:28,387 Firmware version: 288
14:54:28,388 Chip ID: 01-D0B21018000062
14:54:28,388 Version string: ‘colormunki FW V1.32 Build Nr. 1303’
14:54:28,390 Calibration Ver.: 6
14:54:28,391 Production No.: 154368
14:54:28,565 Display type ignored – instrument doesn’t support display type selection
14:54:28,661 Created MadVR window
14:54:29,562
14:54:29,562 Set instrument sensor to calibration position,
14:54:29,563 and then hit any key to continue,
14:54:29,565 DisplayCAL: Waiting for send buffer
14:54:43,000 DisplayCAL: Sending buffer: ‘ ‘
14:54:43,000 or hit Esc or Q to abort:
14:54:45,720 Calibration complete
14:54:45,720
14:54:45,769 Place instrument on test window.
14:54:45,773 DisplayCAL: Waiting for send buffer
14:55:19,436 DisplayCAL: Sending buffer: ‘ ‘
14:55:19,437 Hit Esc or Q to give up, any other key to continue:
14:55:22,657 Measured display update delay of 0 msec, using delay of 100 msec & 2 msec inst
14:55:22,657 reaction
15:00:27,446 Patch 175 of 175
15:00:27,467 The instrument can be removed from the screen.
15:01:03,099 DisplayCAL: Reached EOF (OK)
15:01:03,101 … interrompu.
15:01:03,151 La caractérisation n’a pas été achevée.2018-03-11 at 16:38 #11039Hi,
please try the 32-bit version of ArgyllCMS.
2018-03-17 at 17:42 #11105Ca marche ! Merci beaucoup.
Finally the thruster went on and made all the calculations … -
AuthorPosts