- This topic has 2 replies, 3 voices, and was last updated 5 years, 6 months ago by
.
-
Posts
-
Hello, I apologize in advance if such topics are not allowed, but unfortunately I have almost no experience with calibration and the extracted data means almost nothing to me. In this case I calibrated the gamma 2.2 with absolutely automatic settings monitor LG 23MB35PM-B. Due to the lack of experience, I can’t really judge whether the calibration really worked or not. The only thing that makes a bad impression on me is the low contrast level of only 658.3: 1 given that the monitor supports up to 1000: 1. The adjustment setting is on the White LCD as is the monitor screen. I provide you with the report I made through DisplayCAL. I will be happy for any opinion, advice and idea how to improve the calibration. Thanks for your time.
The spyder devices are not accurate, your nits are too high, the white point is very off, it should be 6504K.
The only thing that makes a bad impression on me is the low contrast level of only 658.3: 1 given that the monitor supports up to 1000: 1.
In addition to S Simeonov comment, check if you are using HDMI and card is sending limited range (16-235) signal but monitor input is configured to full range (0-255). Google to change it depending on your card manufacturer.
