Calibration clearly not working. Forcing me to change monitor settings to green

[Aaron Baker]

When Running the calibration, it askes me to make the white balance a distinct green color. this is before it calibrates, after calibration the screen has a green tint. I have no idea what settings to change so that it properly calibrates. Attached is my verification report.

Settings:

LCD(Generic)   Correction: Auto (None)

Color temperature 5000 reffrence daylight

White level As measured

Black level As measured

Tone Curve Gamma 2.2

Calibration speed Fast

Profile type xyz lut +matrix

Quality High

System specs:

Windows 10

Spider 3 Pro

Acer  XC270H B

Attachments:

You must be logged in to view attached files.

[Алексей Коробов]

1. Check if your videocard supports calibration curves loading (has 1D LUT unit) for current output. If not, change output first (HDMI1 to HDMI2 etc.). Use GammaTest utility (attached), videocard is OK if utility switches display to magenta.
2. Choose suitable colorimeter correction, your correction is none, that is wrong. Choose one of standard types, here I can’t help, I make my own corrections for different colorimeter.
3. BUT: your Spyder 3 is very old, Spyders before X series have fading color filters, you have to change it to get really good result. Better to use I1Display devices.

• This reply was modified 3 years, 3 months ago by Алексей Коробов.
• This reply was modified 3 years, 3 months ago by Алексей Коробов.

Attachments:

You must be logged in to view attached files.

[Author]

Posts