- This topic has 1 reply, 2 voices, and was last updated 6 years, 6 months ago by
.
-
Posts
-
I’m using a colormunki Display on a 32-bit Linux Manjaro laptop with minimal RAM. I did import the colorimeter corrections, but didn’t specify a measurement mode or correction. I’d appreciate any suggestions. Thanks! This is the log file:
19:32:11,433 Calibrate & profile
19:32:14,957 Detecting output levels range…
19:32:14,969 ——————————————————————————–
19:32:14,974 Session log: 0_16
19:32:14,974
19:32:14,975 Working directory:
19:32:14,975 /
19:32:14,975 tmp/
19:32:14,976 DisplayCAL-eeaRBE/
19:32:14,976
19:32:14,979 Command line:
19:32:14,979 /usr/bin/dispread
19:32:14,980 -v
19:32:14,983 -k
19:32:14,984 /usr/share/DisplayCAL/linear.cal
19:32:14,984 -d1
19:32:14,985 -c1
19:32:14,985 -yn
19:32:14,985 -P0.5,0.5,1.49868073879
19:32:14,986 0_16
19:32:14,986
19:32:15,076 DisplayCAL: Starting interaction with subprocess
19:32:15,697 Number of patches = 3
19:32:15,698 Setting up the instrument
19:32:16,914 Product Name: Colormunki Display
19:32:16,919 Serial Number: CM-14.A-02.150421.04
19:32:16,924 Firmware Version: v1.03
19:32:16,926 Firmware Date: 05Jun12
19:32:17,472 Place instrument on test window.
19:32:17,479 DisplayCAL: Waiting for send buffer
19:32:18,978 DisplayCAL: Skipping place instrument on screen message…
19:32:18,983 DisplayCAL: Sending buffer: ‘ ‘
19:32:19,036 Hit Esc or Q to give up, any other key to continue:
19:32:19,516 Patch 1 of 3
19:32:19,517
19:32:19,518 Spot read failed due to the sensor being in the wrong position
19:32:19,519 (Ambient filter should be removed)
19:32:19,543 DisplayCAL: Waiting for send buffer
19:32:54,074 DisplayCAL: Sending buffer: ‘ ‘
19:32:54,127 Correct position then hit Esc or Q to give up, any other key to retry:
19:32:54,130
19:32:54,131
19:32:54,132 Spot read failed due to the sensor being in the wrong position
19:32:54,133 (Ambient filter should be removed)
19:32:54,167 DisplayCAL: Waiting for send buffer
19:33:15,772 DisplayCAL: Sending buffer: ‘ ‘
19:33:15,825 Correct position then hit Esc or Q to give up, any other key to retry:
19:33:15,828
19:33:15,829
19:33:15,830 Spot read failed due to the sensor being in the wrong position
19:33:15,830 (Ambient filter should be removed)
19:33:15,848 DisplayCAL: Waiting for send buffer
19:33:16,804 DisplayCAL: Sending buffer: ‘ ‘
19:33:16,856 Correct position then hit Esc or Q to give up, any other key to retry:
19:33:16,860
19:33:16,861
19:33:16,862 Spot read failed due to the sensor being in the wrong position
19:33:16,862 (Ambient filter should be removed)
19:33:16,885 DisplayCAL: Waiting for send buffer
19:33:17,690 DisplayCAL: Sending buffer: ‘ ‘
19:33:17,742 Correct position then hit Esc or Q to give up, any other key to retry:
19:33:17,746
19:33:17,747
19:33:17,747 Spot read failed due to the sensor being in the wrong position
19:33:17,748 (Ambient filter should be removed)
19:33:17,760 DisplayCAL: Waiting for send buffer
19:35:25,240 DisplayCAL: Sending buffer: ‘ ‘
19:35:25,292 Correct position then hit Esc or Q to give up, any other key to retry:
19:35:35,654 Patch 3 of 3
19:35:35,655 The instrument can be removed from the screen.
19:35:35,971 Written ‘0_16.ti3’
19:35:35,992 DisplayCAL: Reached EOF (OK)
19:35:36,176 RGB level 0 is 0.411870 cd/m2
19:35:36,178 RGB level 16 is 0.735197 cd/m2
19:35:36,179 Assuming full range output levels
19:35:36,185 ——————————————————————————–
19:35:36,187 Session log: YD477-171WX2 #1 2017-10-29 19-27 2.2 F-S XYZLUT+MTX
19:35:36,188
19:35:36,189 Working directory:
19:35:36,190 /
19:35:36,191 tmp/
19:35:36,193 DisplayCAL-eeaRBE/
19:35:36,194
19:35:36,195 Command line:
19:35:36,196 /usr/bin/dispcal
19:35:36,197 -v2
19:35:36,198 -d1
19:35:36,199 -c1
19:35:36,200 -yn
19:35:36,201 -P0.5,0.5,1.49868073879
19:35:36,202 -ql
19:35:36,203 -t
19:35:36,204 -g2.2
19:35:36,205 -f1.0
19:35:36,206 -k0.0
19:35:36,207 -A4.0
19:35:36,208 -b
19:35:36,209 ‘YD477-171WX2 #1 2017-10-29 19-27 2.2 F-S XYZLUT+MTX’
19:35:36,209
19:35:36,246 DisplayCAL: Starting interaction with subprocess
19:35:36,822 Setting up the instrument
19:35:38,009 Product Name: Colormunki Display
19:35:38,012 Serial Number: CM-14.A-02.150421.04
19:35:38,013 Firmware Version: v1.03
19:35:38,013 Firmware Date: 05Jun12
19:35:38,278 Place instrument on test window.
19:35:38,286 DisplayCAL: Waiting for send buffer
19:35:39,786 DisplayCAL: Skipping place instrument on screen message…
19:35:39,790 DisplayCAL: Sending buffer: ‘ ‘
19:35:39,844 Hit Esc or Q to give up, any other key to continue:
19:35:39,845 Display type is ‘n’
19:35:39,850 Target white = native white point
19:35:39,851 Target white brightness = native brightness
19:35:39,852 Target black brightness = native brightness
19:35:39,860 Black point device hack is enabled
19:35:39,861 Target advertised gamma = 2.200000
19:35:39,862
19:35:39,863 Display adjustment menu:
19:35:39,864 Press 1 .. 7
19:35:39,865 1) Black level (CRT: Offset/Brightness)
19:35:39,873 2) White point (Color temperature, R,G,B, Gain/Contrast)
19:35:39,874 3) White level (CRT: Gain/Contrast, LCD: Brightness/Backlight)
19:35:39,875 4) Black point (R,G,B, Offset/Brightness)
19:35:39,876 5) Check all
19:35:39,878 6) Measure and set ambient for viewing condition adjustment
19:35:39,879 7) Continue on to calibration
19:35:39,880 8) Exit
19:35:39,919 DisplayCAL: Waiting for send buffer
19:35:43,178 DisplayCAL: Sending buffer: ‘7’
19:35:43,231 Commencing display calibration
19:36:12,965 Patch 9 of 9
19:36:12,967 Black = XYZ 0.4176 0.4114 0.7044
19:36:12,968 Red = XYZ 61.922 36.583 6.000
19:36:12,969 Green = XYZ 53.044 90.084 18.970
19:36:12,973 Blue = XYZ 31.361 29.071 132.695
19:36:12,975 White = XYZ 145.886 155.327 156.246
19:38:50,987 Patch 48 of 48
19:38:51,489
19:38:51,491 Initial native brightness target = 155.327247 cd/m^2
19:38:51,497 Target white value is XYZ 145.885516 155.327247 156.246072 [xy 0.318904
19:38:51,497 0.339544]
19:38:51,497 Adjusted target black XYZ 0.4176 0.4114 0.7044, Lab 2.393 0.834 -2.896
19:38:51,498 Target black after min adjust: XYZ 0.4176 0.4114 0.7044, Lab 2.393 0.834 -2.896
19:38:51,498 Gamma curve input offset = 0.000000, output offset = 0.002649, power = 2.213839
19:38:51,499 Total Iteration 2, Final Samples = 32 Final Repeat threshold = 0.900000
19:38:51,499 Creating initial calibration curves…
19:38:51,780
19:38:51,782 Doing iteration 1/2 with 16 sample points and repeat threshold of 1.272792 DE
19:38:53,074 Patch 1 of 16 DE 0.000000, W.DE 0.000000, OK ( < 1.272792)
19:38:54,489 Patch 2 of 16 DE 6.067733, W.DE 6.067733, Repeat
19:38:55,940 Patch 2 of 16 DE 0.542762, W.DE 0.542762, OK ( < 1.272792)
19:38:57,349 Patch 3 of 16 DE 6.095681, W.DE 6.095681, Repeat
19:38:58,795 Patch 3 of 16 DE 0.632347, W.DE 0.632347, OK ( < 1.272792)
19:39:00,201 Patch 4 of 16 DE 6.199810, W.DE 6.199810, Repeat
19:39:01,575 Patch 4 of 16 DE 1.194547, W.DE 1.194547, OK ( < 1.272792)
19:39:02,978 Patch 5 of 16 DE 6.376893, W.DE 6.376893, Repeat
19:39:04,359 Patch 5 of 16 DE 0.637931, W.DE 0.637931, OK ( < 1.272792)
19:39:05,766 Patch 6 of 16 DE 4.767265, W.DE 4.767265, Repeat
19:39:07,142 Patch 6 of 16 DE 1.428627, W.DE 1.428627, Repeat
19:39:08,507 Patch 6 of 16 DE 0.285893, W.DE 0.285893, OK ( < 1.272792)
19:39:11,012 Patch 7 of 16 DE 2.968821, W.DE 2.968821, Repeat
19:39:13,502 Patch 7 of 16 DE 0.903982, W.DE 0.903982, OK ( < 1.272792)
19:39:16,062 Patch 8 of 16 DE 1.648106, W.DE 1.648106, Repeat
19:39:18,597 Patch 8 of 16 DE 0.353291, W.DE 0.353291, OK ( < 1.272792)
19:39:21,249 Patch 9 of 16 DE 3.193269, W.DE 3.193269, Repeat
19:39:23,885 Patch 9 of 16 DE 1.729095, W.DE 1.729095, Repeat
19:39:26,533 Patch 9 of 16 DE 0.561722, W.DE 0.561722, OK ( < 1.272792)
19:39:29,305 Patch 10 of 16 DE 4.520840, W.DE 4.520840, Repeat
19:39:32,074 Patch 10 of 16 DE 1.681977, W.DE 1.681977, Repeat
19:39:34,822 Patch 10 of 16 DE 0.633096, W.DE 0.633096, OK ( < 1.272792)
19:39:37,811 Patch 11 of 16 DE 3.838848, W.DE 3.838848, Repeat
19:39:40,774 Patch 11 of 16 DE 1.247127, W.DE 1.247127, OK ( < 1.272792)
19:39:45,075 Patch 12 of 16 DE 3.939194, W.DE 3.939194, Repeat
19:39:48,293 Patch 12 of 16 DE 1.540584, W.DE 1.540584, Repeat
19:39:51,437 Patch 12 of 16 DE 0.740451, W.DE 0.740451, OK ( < 1.272792)
19:39:56,054 Patch 13 of 16 DE 1.957592, W.DE 1.957592, Repeat
19:40:00,612 Patch 13 of 16 DE 1.241080, W.DE 1.241080, Repeat
19:40:05,044 Patch 13 of 16 DE 0.412515, W.DE 0.412515, OK ( < 1.162325)
19:40:09,759 Patch 14 of 16 DE 0.408785, W.DE 0.408785, Repeat
19:40:28,315 Patch 14 of 16 DE 0.335048, W.DE 0.335048, OK ( < 0.359524)
19:40:33,061 Patch 15 of 16 DE 0.217796, W.DE 59.301526, Repeat
19:40:37,761 Patch 15 of 16 DE 0.163750, W.DE 41.590418, Repeat
19:40:56,610 Patch 15 of 16 DE 0.159952, W.DE 37.168605, Repeat
19:41:01,359 Patch 15 of 16 DE 0.089499, W.DE 23.690016, Repeat
19:41:06,051 Patch 15 of 16 DE 0.064145, W.DE 12.778138, Repeat
19:41:10,727 Patch 15 of 16 DE 0.057372, W.DE 8.665994, Repeat
19:41:15,422 Patch 15 of 16 DE 0.013421, W.DE 0.013421, OK ( < 0.083555)
19:41:20,216 Patch 16 of 16 DE 0.258505, W.DE 258.505213, Repeat
19:41:24,918 Patch 16 of 16 DE 0.199043, W.DE 199.043380, Repeat
19:41:29,615 Patch 16 of 16 DE 0.141450, W.DE 141.450242, Repeat
19:41:48,460 Patch 16 of 16 DE 0.140661, W.DE 140.660971, Repeat
19:41:53,210 Patch 16 of 16 DE 0.077285, W.DE 77.284716, Repeat
19:41:57,929 Patch 16 of 16 DE 0.045463, W.DE 45.463461, Repeat
19:42:02,642 Patch 16 of 16 DE 0.033732, W.DE 33.731686, Repeat
19:42:07,298 Patch 16 of 16 DE 0.000522, W.DE 0.000522, OK ( < 0.083555)
19:42:07,299
19:42:07,304 Brightness error = 0.000000 cd/m^2 (is 154.999884, should be 154.999884)
19:42:07,305 White point error = 0.000000 deltaE
19:42:07,306 Maximum neutral error (@ 0.172427) = 1.250954 deltaE
19:42:07,317 Average neutral error = 0.532020 deltaE
19:42:07,318 Number of measurements taken = 56
19:42:07,319 Computing update to calibration curves…
19:42:07,612
19:42:07,614 Doing iteration 2/2 with 32 sample points and repeat threshold of 0.900000 DE
19:42:09,194 Patch 1 of 32 DE 0.000000, W.DE 0.000000, W.peqDE 0.000000, OK ( < 0.900000)
19:42:10,605 Patch 2 of 32 DE 1.957846, W.DE 1.957846, peqDE 1.957865, Repeat
19:42:12,012 Patch 2 of 32 DE 0.366546, W.DE 0.366546, W.peqDE 0.366553, OK ( < 0.900000)
19:42:13,404 Patch 3 of 32 DE 0.878506, W.DE 0.878506, W.peqDE 0.557199, OK ( < 0.900000)
19:42:14,792 Patch 4 of 32 DE 0.777169, W.DE 0.777169, W.peqDE 0.551367, OK ( < 0.900000)
19:42:16,181 Patch 5 of 32 DE 0.611569, W.DE 0.611569, W.peqDE 0.244992, OK ( < 0.900000)
19:42:17,569 Patch 6 of 32 DE 0.987375, W.DE 0.987375, peqDE 0.421604, Repeat
19:42:18,905 Patch 6 of 32 DE 0.236057, W.DE 0.236057, W.peqDE 0.371556, OK ( < 0.900000)
19:42:20,293 Patch 7 of 32 DE 0.930639, W.DE 0.930639, peqDE 0.765632, Repeat
19:42:21,632 Patch 7 of 32 DE 0.372652, W.DE 0.372652, W.peqDE 0.153520, OK ( < 0.900000)
19:42:23,021 Patch 8 of 32 DE 0.798028, W.DE 0.798028, W.peqDE 0.557614, OK ( < 0.900000)
19:42:24,408 Patch 9 of 32 DE 0.563366, W.DE 0.563366, W.peqDE 0.428180, OK ( < 0.900000)
19:42:25,797 Patch 10 of 32 DE 0.527922, W.DE 0.527922, W.peqDE 0.545928, OK ( < 0.900000)
19:42:27,186 Patch 11 of 32 DE 0.424662, W.DE 0.424662, W.peqDE 0.886264, OK ( < 0.900000)
19:42:29,668 Patch 12 of 32 DE 0.224568, W.DE 0.224568, W.peqDE 0.333004, OK ( < 0.900000)
19:42:32,167 Patch 13 of 32 DE 0.167593, W.DE 0.167593, W.peqDE 0.176438, OK ( < 0.900000)
19:42:34,690 Patch 14 of 32 DE 0.722034, W.DE 0.722034, W.peqDE 0.825512, OK ( < 0.900000)
19:42:37,233 Patch 15 of 32 DE 0.604322, W.DE 0.604322, W.peqDE 0.715616, OK ( < 0.900000)
19:42:39,806 Patch 16 of 32 DE 0.179874, W.DE 0.179874, W.peqDE 0.579857, OK ( < 0.900000)
19:42:42,415 Patch 17 of 32 DE 0.333015, W.DE 0.333015, W.peqDE 0.546931, OK ( < 0.900000)
19:42:45,069 Patch 18 of 32 DE 0.542152, W.DE 0.542152, W.peqDE 0.309561, OK ( < 0.900000)
19:42:47,768 Patch 19 of 32 DE 0.395606, W.DE 0.395606, W.peqDE 0.457270, OK ( < 0.900000)
19:42:50,522 Patch 20 of 32 DE 0.351001, W.DE 0.351001, W.peqDE 0.360957, OK ( < 0.900000)
19:42:53,375 Patch 21 of 32 DE 1.203747, W.DE 1.203747, peqDE 0.791896, Repeat
19:42:56,195 Patch 21 of 32 DE 0.720586, W.DE 0.720586, peqDE 0.910626, Repeat
19:42:59,031 Patch 21 of 32 DE 0.188726, W.DE 0.188726, W.peqDE 0.446340, OK ( < 0.900000)
19:43:01,981 Patch 22 of 32 DE 1.510427, W.DE 1.510427, peqDE 1.288733, Repeat
19:43:04,888 Patch 22 of 32 DE 0.619449, W.DE 0.619449, W.peqDE 0.877345, OK ( < 0.900000)
19:43:07,920 Patch 23 of 32 DE 1.716958, W.DE 1.716958, peqDE 1.164423, Repeat
19:43:10,988 Patch 23 of 32 DE 0.844130, W.DE 0.844130, peqDE 1.375850, Repeat
19:43:13,972 Patch 23 of 32 DE 0.582083, W.DE 0.582083, peqDE 0.956800, Repeat
19:43:26,022 Patch 23 of 32 DE 0.485715, W.DE 0.485715, W.peqDE 0.315852, OK ( < 0.900000)
19:43:30,158 Patch 24 of 32 DE 1.120295, W.DE 1.120295, peqDE 0.817400, Repeat
19:43:33,348 Patch 24 of 32 DE 0.445578, W.DE 0.445578, W.peqDE 0.678423, OK ( < 0.900000)
19:43:37,655 Patch 25 of 32 DE 1.042033, W.DE 1.042033, peqDE 1.114267, Repeat
19:43:41,968 Patch 25 of 32 DE 0.319662, W.DE 0.319662, W.peqDE 0.224510, OK ( < 0.900000)
19:43:46,424 Patch 26 of 32 DE 0.824992, W.DE 0.824992, peqDE 1.153008, Repeat
19:43:50,884 Patch 26 of 32 DE 0.417887, W.DE 0.417887, peqDE 0.768753, Repeat
19:43:55,314 Patch 26 of 32 DE 0.267259, W.DE 0.267259, W.peqDE 0.425751, OK ( < 0.644349)
19:43:59,876 Patch 27 of 32 DE 0.603982, W.DE 0.603982, peqDE 0.722819, Repeat
19:44:04,444 Patch 27 of 32 DE 0.468608, W.DE 0.468608, peqDE 0.508891, Repeat
19:44:22,437 Patch 27 of 32 DE 0.399038, W.DE 0.399038, peqDE 0.503085, Repeat
19:44:27,005 Patch 27 of 32 DE 0.166003, W.DE 0.166003, peqDE 0.398016, Repeat
19:44:31,528 Patch 27 of 32 DE 0.195354, W.DE 0.195354, W.peqDE 0.273752, OK ( < 0.393354)
19:44:36,163 Patch 28 of 32 DE 0.647904, W.DE 0.647904, peqDE 0.682694, Repeat
19:44:40,753 Patch 28 of 32 DE 0.340457, W.DE 0.340457, peqDE 0.363202, Repeat
19:44:59,158 Patch 28 of 32 DE 0.340457, W.DE 0.340457, peqDE 0.363202, Repeat
19:45:03,836 Patch 28 of 32 DE 0.173646, W.DE 0.173646, peqDE 0.246868, Repeat
19:45:08,435 Patch 28 of 32 DE 0.176391, W.DE 0.176391, peqDE 0.250477, Repeat (got worse)
19:45:13,043 Patch 28 of 32 DE 0.044301, W.DE 0.044301, W.peqDE 0.156373, OK ( < 0.217761)
19:45:17,728 Patch 29 of 32 DE 0.414548, W.DE 4.029223, peqDE 4.046045, Repeat
19:45:36,297 Patch 29 of 32 DE 0.241180, W.DE 3.925613, peqDE 3.936756, Repeat
19:45:41,049 Patch 29 of 32 DE 0.121231, W.DE 1.651835, peqDE 1.666030, Repeat
19:45:45,724 Patch 29 of 32 DE 0.175453, W.DE 0.175453, peqDE 0.316111, Repeat
19:45:50,400 Patch 29 of 32 DE 0.053951, W.DE 1.756331, peqDE 1.758397, Repeat
19:45:55,086 Patch 29 of 32 DE 0.045384, W.DE 0.045384, peqDE 0.175431, Repeat
19:45:59,761 Patch 29 of 32 DE 0.055170, W.DE 1.722359, peqDE 1.724264, Repeat
19:46:04,439 Patch 29 of 32 DE 0.067762, W.DE 0.067762, peqDE 0.184552, Repeat
19:46:09,117 Patch 29 of 32 DE 0.084518, W.DE 0.555050, peqDE 0.561331, Repeat
19:46:13,745 Patch 29 of 32 DE 0.045384, W.DE 0.045384, W.peqDE 0.175431, Fail ( > 0.109292)
19:46:18,456 Patch 30 of 32 DE 0.171101, W.DE 14.316096, peqDE 14.317630, Repeat
19:46:37,209 Patch 30 of 32 DE 0.171185, W.DE 14.156855, peqDE 14.158409, Repeat
19:46:41,961 Patch 30 of 32 DE 0.043324, W.DE 9.680373, peqDE 9.681228, Repeat
19:46:46,638 Patch 30 of 32 DE 0.041573, W.DE 9.757301, peqDE 9.758106, Repeat
19:46:51,338 Patch 30 of 32 DE 0.092141, W.DE 0.092141, peqDE 0.188244, Repeat
19:46:56,020 Patch 30 of 32 DE 0.056981, W.DE 6.011431, peqDE 0.188244, Repeat (got worse)
19:47:00,715 Patch 30 of 32 DE 0.084342, W.DE 0.084342, peqDE 0.185680, Repeat
19:47:05,383 Patch 30 of 32 DE 0.042502, W.DE 9.379440, peqDE 0.185680, Repeat (got worse)
19:47:10,048 Patch 30 of 32 DE 0.041331, W.DE 9.615253, peqDE 0.185680, Repeat (got worse)
19:47:14,716 Patch 30 of 32 DE 0.084342, W.DE 0.084342, W.peqDE 0.185680, Fail ( > 0.055281)
19:47:19,403 Patch 31 of 32 DE 0.048913, W.DE 0.048913, peqDE 0.061807, Repeat
19:47:38,214 Patch 31 of 32 DE 0.046689, W.DE 0.046689, peqDE 0.059805, Repeat
19:47:42,995 Patch 31 of 32 DE 0.044891, W.DE 17.622155, peqDE 0.059805, Repeat (got worse)
19:47:47,617 Patch 31 of 32 DE 0.039037, W.DE 17.476611, peqDE 0.059805, Repeat (got worse)
19:47:52,298 Patch 31 of 32 DE 0.045929, W.DE 18.689532, peqDE 0.059805, Repeat (got worse)
19:47:56,921 Patch 31 of 32 DE 0.043176, W.DE 18.139908, peqDE 0.059805, Repeat (got worse)
19:48:01,562 Patch 31 of 32 DE 0.049559, W.DE 0.049559, peqDE 0.062078, Repeat
19:48:06,185 Patch 31 of 32 DE 0.041731, W.DE 17.765015, peqDE 0.059805, Repeat (got worse)
19:48:10,827 Patch 31 of 32 DE 0.046308, W.DE 0.046308, peqDE 0.059487, Repeat
19:48:15,527 Patch 31 of 32 DE 0.046308, W.DE 0.046308, W.peqDE 0.059487, Fail ( > 0.050000)
19:48:20,215 Patch 32 of 32 DE 0.001482, W.DE 0.001482, W.peqDE 0.001482, OK ( < 0.050000)
19:48:20,216
19:48:20,220 Brightness error = 0.000000 cd/m^2 (is 154.758325, should be 154.758325)
19:48:20,221 White point error = 0.000000 deltaE
19:48:20,222 Maximum neutral error (@ 0.898790) = 0.878505 deltaE
19:48:20,234 Average neutral error = 0.370546 deltaE
19:48:20,235 Failed to meet target 0.900000 delta E, got worst case 0.084342
19:48:20,236 Number of measurements taken = 99
19:48:20,247 Computing update to calibration curves…
19:48:20,738 The instrument can be removed from the screen.
19:48:21,069 Written calibration file ‘YD477-171WX2 #1 2017-10-29 19-27 2.2 F-S
19:48:21,069 XYZLUT+MTX.cal’
19:48:21,077 DisplayCAL: Reached EOF (OK)
19:48:21,424 ——————————————————————————–
19:48:21,425 Session log: YD477-171WX2 #1 2017-10-29 19-27 2.2 F-S XYZLUT+MTX
19:48:21,426
19:48:21,427 Working directory:
19:48:21,428 /
19:48:21,428 tmp/
19:48:21,429 DisplayCAL-eeaRBE/
19:48:21,430
19:48:21,430 Command line:
19:48:21,431 /usr/bin/dispread
19:48:21,432 -v
19:48:21,432
19:48:21,437 -d1
19:48:21,437 -c1
19:48:21,437 -yn
19:48:21,438 -P0.5,0.5,1.49868073879
19:48:21,438 -k
19:48:21,438 ‘YD477-171WX2 #1 2017-10-29 19-27 2.2 F-S XYZLUT+MTX.cal’
19:48:21,439 ‘YD477-171WX2 #1 2017-10-29 19-27 2.2 F-S XYZLUT+MTX’
19:48:21,439
19:48:21,537 DisplayCAL: Starting interaction with subprocess
19:48:21,543
19:48:22,101 Number of patches = 175
19:48:22,111 Setting up the instrument
19:48:23,256 Product Name: Colormunki Display
19:48:23,258 Serial Number: CM-14.A-02.150421.04
19:48:23,259 Firmware Version: v1.03
19:48:23,260 Firmware Date: 05Jun12
19:48:23,525 Place instrument on test window.
19:48:23,531 DisplayCAL: Waiting for send buffer
19:48:25,030 DisplayCAL: Skipping place instrument on screen message…
19:48:25,037 DisplayCAL: Sending buffer: ‘ ‘
19:48:25,091 Hit Esc or Q to give up, any other key to continue:
19:54:53,730 Patch 175 of 175
19:54:53,731 The instrument can be removed from the screen.
19:54:54,099 Written ‘YD477-171WX2 #1 2017-10-29 19-27 2.2 F-S XYZLUT+MTX.ti3’
19:54:54,106 DisplayCAL: Reached EOF (OK)
19:54:54,603 Create profile from measurement data…
19:54:54,837
19:54:54,861
19:54:54,934 -> Preparing ChromaticityType tag from TI3 colorants
19:54:54,954 -> Storing settings in TI3
19:54:55,335 Extracting neutrals from /tmp/DisplayCAL-eeaRBE/YD477-171WX2 #1 2017-10-29 19-27
19:54:55,335 2.2 F-S XYZLUT+MTX.ti3
19:54:55,462 R=G=B (>= 1% luminance) dE*00 avg 0.978806586504 peak 2.26373025782
19:54:55,540 Initial cLUT resolution 5x5x5
19:55:12,201 Final interpolated cLUT resolution 33x33x33
19:55:12,243 ——————————————————————————–
19:55:12,245 Creating matrix from primaries
19:55:12,593 ——————————————————————————–
19:55:12,594 Creating shaper tags in separate step
19:55:12,859 ——————————————————————————–
19:55:12,859 Adding rTRC from forward A2B lookup to YD477-171WX2 #1 2017-10-29 19-27 2.2 F-S
19:55:12,859 XYZLUT+MTX
19:55:12,866 Adding gTRC from forward A2B lookup to YD477-171WX2 #1 2017-10-29 19-27 2.2 F-S
19:55:12,866 XYZLUT+MTX
19:55:12,867 Adding bTRC from forward A2B lookup to YD477-171WX2 #1 2017-10-29 19-27 2.2 F-S
19:55:12,867 XYZLUT+MTX
19:55:12,879 ——————————————————————————–
19:55:12,881 Applying black point compensation to rTRC
19:55:12,882 Applying black point compensation to gTRC
19:55:12,883 Applying black point compensation to bTRC
19:55:13,091 Applying 0% black point correction to A2B0 table
19:55:27,933 100%
19:55:28,285 ——————————————————————————–
19:55:28,287 Generating A2B1 by copying A2B0
19:55:28,289 Generating B2A1 table by inverting A2B1 table
19:55:28,290
19:55:28,478 Black XYZ: 0.0025 0.0026 0.0022
19:55:28,479 White XYZ: 0.9642 1.0000 0.8249
19:55:28,480 R XYZ: 0.4201 0.2433 0.0313
19:55:28,480 G XYZ: 0.3643 0.5793 0.1032
19:55:28,481 B XYZ: 0.1820 0.1784 0.6966
19:55:28,482 Generating input curve PCS values…
19:55:28,584 Looking up input curve RGB values…
19:55:32,525 Setting curve entry #0 (0.000000 0.000000 0.000000) to black because it got
19:55:32,525 clipped
19:55:32,527 Setting curve entry #1 (0.000000 0.000000 0.000000) to black because it got
19:55:32,527 clipped
19:55:32,528 Setting curve entry #2 (0.000000 0.000000 0.000000) to black because it got
19:55:32,528 clipped
19:55:32,529 Setting curve entry #3 (0.000000 0.000000 0.000000) to black because it got
19:55:32,529 clipped
19:55:32,530 Setting curve entry #4 (0.000000 0.000000 0.000000) to black because it got
19:55:32,530 clipped
19:55:32,530 Setting curve entry #5 (0.000000 0.000000 0.000000) to black because it got
19:55:32,530 clipped
19:55:32,531 Setting curve entry #6 (0.000000 0.000000 0.000000) to black because it got
19:55:32,531 clipped
19:55:32,532 Setting curve entry #7 (0.000000 0.000000 0.000000) to black because it got
19:55:32,532 clipped
19:55:32,533 Setting curve entry #8 (0.000000 0.000000 0.000000) to black because it got
19:55:32,533 clipped
19:55:32,534 Setting curve entry #9 (0.000000 0.000000 0.000000) to black because it got
19:55:32,534 clipped
19:55:32,535 Setting curve entry #10 (0.000000 0.000000 0.000000) to black because it got
19:55:32,535 clipped
19:55:32,535 Setting curve entry #11 (0.000000 0.000000 0.000000) to black because it got
19:55:32,535 clipped
19:55:32,536 Setting curve entry #12 (0.000000 0.000000 0.000000) to black because it got
19:55:32,536 clipped
19:55:32,537 Setting curve entry #13 (0.000000 0.000000 0.000000) to black because it got
19:55:32,537 clipped
19:55:32,538 Setting curve entry #14 (0.000000 0.000000 0.000000) to black because it got
19:55:32,538 clipped
19:55:32,539 Setting curve entry #15 (0.000000 0.000000 0.000000) to black because it got
19:55:32,539 clipped
19:55:32,539 Setting curve entry #16 (0.000000 0.000000 0.000000) to black because it got
19:55:32,539 clipped
19:55:32,540 Setting curve entry #17 (0.000000 0.000000 0.000000) to black because it got
19:55:32,540 clipped
19:55:32,541 Setting curve entry #18 (0.000000 0.000000 0.000000) to black because it got
19:55:32,541 clipped
19:55:32,542 Setting curve entry #19 (0.000000 0.000000 0.000000) to black because it got
19:55:32,542 clipped
19:55:32,543 Setting curve entry #20 (0.000000 0.000000 0.000000) to black because it got
19:55:32,543 clipped
19:55:32,544 Setting curve entry #21 (0.000000 0.000000 0.000000) to black because it got
19:55:32,544 clipped
19:55:32,544 Setting curve entry #22 (0.000000 0.000000 0.000000) to black because it got
19:55:32,544 clipped
19:55:32,545 Setting curve entry #23 (0.000000 0.000000 0.000000) to black because it got
19:55:32,545 clipped
19:55:32,546 Setting curve entry #24 (0.000000 0.000000 0.000000) to black because it got
19:55:32,546 clipped
19:55:32,547 Setting curve entry #25 (0.000000 0.000000 0.000000) to black because it got
19:55:32,547 clipped
19:55:32,548 Setting curve entry #26 (0.000000 0.000000 0.000000) to black because it got
19:55:32,548 clipped
19:55:32,548 Setting curve entry #27 (0.000000 0.000000 0.000000) to black because it got
19:55:32,548 clipped
19:55:32,549 Setting curve entry #28 (0.000000 0.000000 0.000000) to black because it got
19:55:32,549 clipped
19:55:32,549 Setting curve entry #29 (0.000000 0.000000 0.000000) to black because it got
19:55:32,549 clipped
19:55:32,549 Setting curve entry #30 (0.000000 0.000000 0.000000) to black because it got
19:55:32,549 clipped
19:55:32,550 Setting curve entry #31 (0.000000 0.000000 0.000000) to black because it got
19:55:32,550 clipped
19:55:32,550 Setting curve entry #32 (0.000000 0.000000 0.000000) to black because it got
19:55:32,550 clipped
19:55:32,550 Setting curve entry #33 (0.000000 0.000000 0.000000) to black because it got
19:55:32,550 clipped
19:55:32,551 Setting curve entry #34 (0.000000 0.000000 0.000000) to black because it got
19:55:32,551 clipped
19:55:32,551 Setting curve entry #35 (0.000000 0.000000 0.000000) to black because it got
19:55:32,551 clipped
19:55:32,551 Setting curve entry #36 (0.000000 0.000000 0.000000) to black because it got
19:55:32,551 clipped
19:55:32,552 Setting curve entry #37 (0.000000 0.000000 0.000000) to black because it got
19:55:32,552 clipped
19:55:32,552 Setting curve entry #38 (0.000000 0.000000 0.000000) to black because it got
19:55:32,552 clipped
19:55:32,552 Setting curve entry #39 (0.000000 0.000000 0.000000) to black because it got
19:55:32,552 clipped
19:55:32,553 Setting curve entry #40 (0.000000 0.000000 0.000000) to black because it got
19:55:32,553 clipped
19:55:32,553 Setting curve entry #41 (0.000000 0.000000 0.000000) to black because it got
19:55:32,553 clipped
19:55:32,554 Setting curve entry #42 (0.000000 0.000000 0.000000) to black because it got
19:55:32,554 clipped
19:55:32,555 Setting curve entry #43 (0.000000 0.000000 0.000000) to black because it got
19:55:32,555 clipped
19:55:32,556 Setting curve entry #44 (0.000000 0.000000 0.000000) to black because it got
19:55:32,556 clipped
19:55:32,557 Setting curve entry #45 (0.000000 0.000000 0.000000) to black because it got
19:55:32,557 clipped
19:55:32,558 Setting curve entry #46 (0.000000 0.000000 0.000000) to black because it got
19:55:32,558 clipped
19:55:32,558 Setting curve entry #47 (0.000000 0.000000 0.000000) to black because it got
19:55:32,558 clipped
19:55:32,559 Setting curve entry #48 (0.000000 0.000000 0.000000) to black because it got
19:55:32,559 clipped
19:55:32,560 Setting curve entry #49 (0.000000 0.000000 0.000000) to black because it got
19:55:32,560 clipped
19:55:32,561 Setting curve entry #50 (0.000000 0.000000 0.000000) to black because it got
19:55:32,561 clipped
19:55:32,562 Setting curve entry #51 (0.000000 0.000000 0.000000) to black because it got
19:55:32,562 clipped
19:55:32,563 Setting curve entry #52 (0.000000 0.000000 0.000000) to black because it got
19:55:32,563 clipped
19:55:32,564 Setting curve entry #53 (0.000000 0.000000 0.000000) to black because it got
19:55:32,564 clipped
19:55:32,565 Setting curve entry #54 (0.000000 0.000000 0.000000) to black because it got
19:55:32,565 clipped
19:55:32,566 Setting curve entry #55 (0.000000 0.000000 0.000000) to black because it got
19:55:32,566 clipped
19:55:32,567 Setting curve entry #56 (0.000000 0.000000 0.000000) to black because it got
19:55:32,567 clipped
19:55:32,568 Setting curve entry #57 (0.000000 0.000000 0.000000) to black because it got
19:55:32,568 clipped
19:55:32,573 Setting curve entry #58 (0.000000 0.000000 0.000000) to black because it got
19:55:32,573 clipped
19:55:32,573 Setting curve entry #59 (0.000000 0.000000 0.000000) to black because it got
19:55:32,573 clipped
19:55:32,574 Setting curve entry #60 (0.000000 0.000000 0.000000) to black because it got
19:55:32,574 clipped
19:55:32,574 Setting curve entry #61 (0.000000 0.000000 0.000000) to black because it got
19:55:32,574 clipped
19:55:32,574 Setting curve entry #62 (0.000000 0.000000 0.000000) to black because it got
19:55:32,574 clipped
19:55:32,575 Setting curve entry #63 (0.000000 0.000000 0.000000) to black because it got
19:55:32,575 clipped
19:55:32,575 Setting curve entry #64 (0.000000 0.000000 0.000000) to black because it got
19:55:32,575 clipped
19:55:32,575 Setting curve entry #65 (0.000000 0.000000 0.000000) to black because it got
19:55:32,575 clipped
19:55:32,576 Setting curve entry #66 (0.000000 0.000000 0.000000) to black because it got
19:55:32,576 clipped
19:55:32,576 Setting curve entry #67 (0.000000 0.000000 0.000000) to black because it got
19:55:32,576 clipped
19:55:32,581 Setting curve entry #68 (0.000000 0.000000 0.000000) to black because it got
19:55:32,581 clipped
19:55:32,582 Setting curve entry #69 (0.000000 0.000000 0.000000) to black because it got
19:55:32,582 clipped
19:55:32,582 Setting curve entry #70 (0.000000 0.000000 0.000000) to black because it got
19:55:32,582 clipped
19:55:32,582 Setting curve entry #71 (0.000000 0.000000 0.000000) to black because it got
19:55:32,582 clipped
19:55:32,583 Setting curve entry #72 (0.000000 0.000000 0.000000) to black because it got
19:55:32,583 clipped
19:55:32,583 Setting curve entry #73 (0.000000 0.000000 0.000000) to black because it got
19:55:32,583 clipped
19:55:32,587 Setting curve entry #74 (0.000000 0.000000 0.000000) to black because it got
19:55:32,587 clipped
19:55:32,587 Setting curve entry #75 (0.000000 0.000000 0.000000) to black because it got
19:55:32,587 clipped
19:55:32,588 Setting curve entry #76 (0.000000 0.000000 0.000000) to black because it got
19:55:32,588 clipped
19:55:32,588 Setting curve entry #77 (0.000000 0.000000 0.000000) to black because it got
19:55:32,588 clipped
19:55:32,588 Setting curve entry #78 (0.000000 0.000000 0.000000) to black because it got
19:55:32,588 clipped
19:55:32,589 Setting curve entry #79 (0.000000 0.000000 0.000000) to black because it got
19:55:32,589 clipped
19:55:32,589 Setting curve entry #80 (0.000000 0.000000 0.000000) to black because it got
19:55:32,589 clipped
19:55:32,589 Setting curve entry #81 (0.000000 0.000000 0.000000) to black because it got
19:55:32,589 clipped
19:55:32,590 Setting curve entry #82 (0.000000 0.000000 0.000000) to black because it got
19:55:32,590 clipped
19:55:32,593 Setting curve entry #83 (0.000000 0.000000 0.000000) to black because it got
19:55:32,593 clipped
19:55:32,594 Setting curve entry #84 (0.000000 0.000000 0.000000) to black because it got
19:55:32,594 clipped
19:55:32,595 Setting curve entry #85 (0.000000 0.000000 0.000000) to black because it got
19:55:32,595 clipped
19:55:32,596 Setting curve entry #86 (0.000000 0.000000 0.000000) to black because it got
19:55:32,596 clipped
19:55:32,597 Setting curve entry #87 (0.000000 0.000000 0.000000) to black because it got
19:55:32,597 clipped
19:55:32,598 Setting curve entry #88 (0.000000 0.000000 0.000000) to black because it got
19:55:32,598 clipped
19:55:32,598 Setting curve entry #89 (0.000000 0.000000 0.000000) to black because it got
19:55:32,598 clipped
19:55:32,599 Setting curve entry #90 (0.000000 0.000000 0.000000) to black because it got
19:55:32,599 clipped
19:55:32,600 Setting curve entry #91 (0.000000 0.000000 0.000000) to black because it got
19:55:32,600 clipped
19:55:32,601 Setting curve entry #92 (0.000000 0.000000 0.000000) to black because it got
19:55:32,601 clipped
19:55:32,602 Setting curve entry #93 (0.000000 0.000000 0.000000) to black because it got
19:55:32,602 clipped
19:55:32,603 Setting curve entry #94 (0.000000 0.000000 0.000000) to black because it got
19:55:32,603 clipped
19:55:32,604 Setting curve entry #95 (0.000000 0.000000 0.000000) to black because it got
19:55:32,604 clipped
19:55:32,604 Setting curve entry #96 (0.000000 0.000000 0.000000) to black because it got
19:55:32,604 clipped
19:55:32,605 Setting curve entry #97 (0.000000 0.000000 0.000000) to black because it got
19:55:32,605 clipped
19:55:32,610 Setting curve entry #4095 (1.000000 0.999995 1.000000) to white because it got
19:55:32,610 clipped
19:55:32,615 Setting up matrix
19:55:32,618 Increasing saturation of actual primaries for PCS candidate to 113%…
19:55:32,620 R xy 0.604744 0.350187 -> 0.638419 0.349101
19:55:32,621 G xy 0.348025 0.553389 -> 0.348327 0.578719
19:55:32,622 B xy 0.172215 0.168808 -> 0.149661 0.144143
19:55:32,624 Checking for suitable PCS candidate…
19:55:32,627 Skipping PCS candidate based on actual primaries because it does not encompass
19:55:32,627 Rec. 709 blue
19:55:32,630 Rec709-encompassing, variant 1 fit: 1.05 (area: 48.91%)
19:55:32,631 Using primaries: Rec709-encompassing, variant 1
19:55:32,632 Using R XYZ: 0.4858 0.2242 0.0015
19:55:32,634 Using G XYZ: 0.3599 0.7326 0.0681
19:55:32,635 Using B XYZ: 0.1185 0.0432 0.7553
19:55:32,636 R+G+B XYZ: 0.9642 1.0000 0.8249
19:55:32,637 Correction factors: 1.0000 1.0000 1.0000
19:55:32,638 Matrix 1:
19:55:32,640 [2.6443266000333088, -1.2671854900907105, -0.34243449831665096]
19:55:32,641 [-0.8132078188032739, 1.7620115550086903, 0.02677103149645555]
19:55:32,642 [0.06804998251154655, -0.15628104056263473, 1.3221811703539847]
19:55:32,643 Matrix 2:
19:55:32,650 [2.6442975337435684, -1.267171561258845, -0.3424307342958431]
19:55:32,651 [-0.8132099380290951, 1.7620161468243356, 0.026771101261969233]
19:55:32,652 [0.06805085633370112, -0.15628304734985995, 1.3221981483333514]
19:55:32,652 Matrix 3:
19:55:32,654 [1.999969482421875, 0, 0]
19:55:32,655 [0, 1.999969482421875, 0]
19:55:32,655 [0, 0, 1.999969482421875]
19:55:32,656 Final matrix:
19:55:32,656 [5.288514369930565, -2.5343044515105717, -0.6848510184349998]
19:55:32,657 [-1.6263950588603744, 3.523978521183253, 0.05354138553476421]
19:55:32,658 [0.1360996359200776, -0.3125613253196128, 2.644355946381414]
19:55:32,659 Applying matrix to input curve XYZ values…
19:55:32,724 Generating input curves…
19:56:02,109 100%
19:56:02,111 Generating A2B1 table lookup input values…
19:56:02,121 cLUT grid res: 45
19:56:02,122 Looking up input values through A2B1 table (1 workers)…
19:56:02,122 Using CAM Jab for clipping
20:48:39,426 100%
20:48:39,710 Input black XYZ: 0.002531 0.002622 0.002165
20:48:39,766 Input white XYZ: 0.964200 1.000000 0.824900
20:48:40,148 Output black RGB: 0.0000 0.0000 0.0000
20:48:40,150 Output white RGB: 99.9997 100.0000 100.0000
20:48:40,772 Filling cLUT…
20:48:41,812 100%
20:48:43,209 Smoothing B2A1…
20:48:50,600 Generating B2A0 table by inverting A2B0 table
20:48:50,603
20:48:51,176 Black XYZ: 0.0025 0.0026 0.0022
20:48:51,178 White XYZ: 0.9642 1.0000 0.8249
20:48:51,179 R XYZ: 0.4201 0.2433 0.0313
20:48:51,180 G XYZ: 0.3643 0.5793 0.1032
20:48:51,181 B XYZ: 0.1820 0.1784 0.6966
20:48:51,182 Generating input curve PCS values…
20:48:51,230 Applying BPC to input curve PCS values…
20:48:51,554 Looking up input curve RGB values…
20:48:53,256 Setting curve entry #4095 (1.000000 0.999995 1.000000) to white because it got
20:48:53,256 clipped
20:48:53,270 Applying matrix to input curve XYZ values…
20:48:53,335 Generating input curves…
20:49:14,561 100%
20:49:17,069 ——————————————————————————–
20:49:17,070 Session log: YD477-171WX2 #1 2017-10-29 19-27 2.2 F-S XYZLUT+MTX
20:49:17,071
20:49:17,103 Working directory:
20:49:17,104 /
20:49:17,105 tmp/
20:49:17,109 DisplayCAL-eeaRBE/
20:49:17,111
20:49:17,122 Command line:
20:49:17,124 /usr/bin/profcheck
20:49:17,127 ‘YD477-171WX2 #1 2017-10-29 19-27 2.2 F-S XYZLUT+MTX.ti3’
20:49:17,129 ‘YD477-171WX2 #1 2017-10-29 19-27 2.2 F-S XYZLUT+MTX.icc’
20:49:17,131
20:49:17,365 Profile check complete, errors: max. = 3.635680, avg. = 0.150968, RMS = 0.487076
20:49:17,377 ——————————————————————————–
20:49:17,379 Generating gamut views…
20:49:18,134 ——————————————————————————–
20:49:18,135 Session log: YD477-171WX2 #1 2017-10-29 19-27 2.2 F-S XYZLUT+MTX
20:49:18,135
20:49:18,136 Working directory:
20:49:18,137 /
20:49:18,138 tmp/
20:49:18,141 DisplayCAL-eeaRBE/
20:49:18,143
20:49:18,145 Command line:
20:49:18,147 /usr/bin/iccgamut
20:49:18,150 -v
20:49:18,151 -w
20:49:18,158 -ir
20:49:18,159 -ff
20:49:18,160 -on
20:49:18,161 -d10.00
20:49:18,162 ‘YD477-171WX2 #1 2017-10-29 19-27 2.2 F-S XYZLUT+MTX.icc’
20:49:18,165
20:49:19,501 Header:
20:49:19,502 size = 1377836 bytes
20:49:19,502 CMM = 0x0
20:49:19,502 Version = 2.4.0
20:49:19,502 Device Class = Display
20:49:19,503 Color Space = RGB
20:49:19,503 Conn. Space = XYZ
20:49:19,503 Date, Time = 29 Oct 2017, 19:54:55
20:49:19,503 Platform = Unrecognized – 0x0
20:49:19,503 Flags = Not Embedded Profile, Use anywhere
20:49:19,504 Dev. Mnfctr. = 0x0
20:49:19,504 Dev. Model = 0x0
20:49:19,504 Dev. Attrbts = Reflective, Glossy, Positive, Color
20:49:19,504 Rndrng Intnt = Perceptual
20:49:19,504 Illuminant = 0.96420288, 1.00000000, 0.82490540 [Lab 100.000000,
20:49:19,504 0.000000, 0.000000]
20:49:19,504 Creator = 0x0
20:49:19,505
20:49:19,505 Total volume of gamut is 491690.880144 cubic colorspace units
20:49:27,900 ——————————————————————————–
20:49:27,901 Command line:
20:49:27,901 /usr/bin/viewgam
20:49:27,901 -cw
20:49:27,902 -t0
20:49:27,902 -w
20:49:27,903 /usr/share/DisplayCAL/ref/sRGB.gam
20:49:27,905 -cn
20:49:27,905 -t.3
20:49:27,906 -s
20:49:27,907 ‘YD477-171WX2 #1 2017-10-29 19-27 2.2 F-S XYZLUT+MTX.gam’
20:49:27,908 -i
20:49:27,909 ‘YD477-171WX2 #1 2017-10-29 19-27 2.2 F-S XYZLUT+MTX vs sRGB.wrl’
20:49:27,910
20:49:27,911 Intersecting volume = 485707.7 cubic units
20:49:27,911 ‘/usr/share/DisplayCAL/ref/sRGB.gam’ volume = 833675.1 cubic units, intersect =
20:49:27,911 58.26%
20:49:27,911 ‘YD477-171WX2 #1 2017-10-29 19-27 2.2 F-S XYZLUT+MTX.gam’ volume = 491690.9
20:49:27,911 cubic units, intersect = 98.78%
20:49:27,921 ——————————————————————————–
20:49:27,922 Command line:
20:49:27,925 /usr/bin/viewgam
20:49:27,927 -cw
20:49:27,929 -t0
20:49:27,930 -w
20:49:27,932 /usr/share/DisplayCAL/ref/ClayRGB1998.gam
20:49:27,933 -cn
20:49:27,935 -t.3
20:49:27,936 -s
20:49:27,938 ‘YD477-171WX2 #1 2017-10-29 19-27 2.2 F-S XYZLUT+MTX.gam’
20:49:27,939 -i
20:49:27,940 ‘YD477-171WX2 #1 2017-10-29 19-27 2.2 F-S XYZLUT+MTX vs ClayRGB1998.wrl’
20:49:27,941
20:49:27,943 Intersecting volume = 491698.8 cubic units
20:49:27,944 ‘/usr/share/DisplayCAL/ref/ClayRGB1998.gam’ volume = 1209985.9 cubic units,
20:49:27,944 intersect = 40.64%
20:49:27,944 ‘YD477-171WX2 #1 2017-10-29 19-27 2.2 F-S XYZLUT+MTX.gam’ volume = 491690.9
20:49:27,944 cubic units, intersect = 100.00%
20:49:27,946 ——————————————————————————–
20:49:27,947 Command line:
20:49:27,948 /usr/bin/viewgam
20:49:27,949 -cw
20:49:27,950 -t0
20:49:27,951 -w
20:49:27,952 /usr/share/DisplayCAL/ref/SMPTE431_P3.gam
20:49:27,953 -cn
20:49:27,954 -t.3
20:49:27,955 -s
20:49:27,956 ‘YD477-171WX2 #1 2017-10-29 19-27 2.2 F-S XYZLUT+MTX.gam’
20:49:27,957 -i
20:49:27,958 ‘YD477-171WX2 #1 2017-10-29 19-27 2.2 F-S XYZLUT+MTX vs SMPTE431_P3.wrl’
20:49:27,959
20:49:27,960 Intersecting volume = 490956.5 cubic units
20:49:27,960 ‘/usr/share/DisplayCAL/ref/SMPTE431_P3.gam’ volume = 1176953.5 cubic units,
20:49:27,960 intersect = 41.71%
20:49:27,960 ‘YD477-171WX2 #1 2017-10-29 19-27 2.2 F-S XYZLUT+MTX.gam’ volume = 491690.9
20:49:27,960 cubic units, intersect = 99.85%
20:49:28,559 ——————————————————————————–
20:49:31,341 /usr/lib/python2.7/site-packages/DisplayCAL/colord.py:85: Warning: property
20:49:31,341 match ‘OutputEdidMd5’=’4efa08efc8761c60d76be27f2a068fca’ does not exist
20:49:47,133 Found display device matching model description at index #0
20:49:48,648 Loading calibration curves from file…
20:49:48,649 /home/panaceus/.local/share/DisplayCAL/storage/YD477-171WX2 #1 2017-10-29 19-27
20:49:48,649 2.2 F-S XYZLUT+MTX/YD477-171WX2 #1 2017-10-29 19-27 2.2 F-S XYZLUT+MTX.icc
20:49:48,971 About to open dispwin object on the display
20:49:48,972 About to clear the calibration
20:49:48,972 About to set display to given calibration
20:49:48,973 Calibration set
20:49:48,973 About to destroy dispwin object
20:49:48,987 …ok.
21:46:01,788 ——————————————————————————–
21:46:01,788 Install profile
21:46:01,848 ——————————————————————————–
21:46:01,849 Session log: YD477-171WX2 #1 2017-10-29 19-27 2.2 F-S XYZLUT+MTX
21:46:01,850
21:46:01,851 Working directory:
21:46:01,854 /
21:46:01,855 tmp/
21:46:01,856 DisplayCAL-rsGLkl/
21:46:01,857
21:46:01,858 Command line:
21:46:01,859 /usr/bin/dispwin
21:46:01,860 -v
21:46:01,861 -d1
21:46:01,862 -c
21:46:01,863 -I
21:46:01,864 ‘YD477-171WX2 #1 2017-10-29 19-27 2.2 F-S XYZLUT+MTX.icc’
21:46:01,865
21:46:02,020 About to open dispwin object on the display
21:46:02,021 About to clear the calibration
21:46:02,021 About to install ‘YD477-171WX2 #1 2017-10-29 19-27 2.2 F-S XYZLUT+MTX.icc’ as
21:46:02,021 display’s default profile
21:46:02,023 Failed to find device that matches 4efa08efc8761c60d76be27f2a068fca: property
21:46:02,023 match ‘OutputEdidMd5’=’4efa08efc8761c60d76be27f2a068fca’ does not existDispwin:
21:46:02,023 Error – Failed to install profile ‘YD477-171WX2 #1 2017-10-29 19-27 2.2 F-S
21:46:02,023 XYZLUT+MTX.icc’!
21:46:02,176
21:46:02,193 DisplayCAL: Trying device ID ‘xrandr-LG Philips’
21:46:24,480 Querying for profile ‘icc-59efb9d5a9997fd487a858c8a5531d6c’ returned no result
21:46:24,480 for 20 secs
21:46:24,559 The profile could not be installed/activated.Calibrite Display SL on Amazon
Disclosure: As an Amazon Associate I earn from qualifying purchases.
