3D LUT not correcting colour temperature?

[dcchan2]

I have a Panasonic PT-RZ370 projector which provides no adjustments in the Dynamic Picture Mode.  I tried using a 3D LUT to do the correction, but that only seems to correct the gamma and not the colour temperature, even though I select a white point of 6500K instead of “As Measured”.  The workflow is similar to the “Video 3D LUT for eeColor”, other than changing the format to CUBE and resolution to 33x33x33.

In the attached figure, solid lines are with the 3DLUT, dashed lines without.

I may be missing something obvious, as I was able to create a good 3D LUT previously on a similar projector.

• This topic was modified 2 years ago by dcchan2.

Attachments:

You must be logged in to view attached files.

[Author]

Posts