DisplayCAL

I recently acquired a Lenovo ThinkPad P70 which includes a built in sensor. I can see that it is detected properly, but I get the following error from dispcal:

$ dispcal -d 2 -v 5 -D 5 -R
Argyll 'V1.8.3' Build 'Linux 64 bit' System 'Linux #40-Ubuntu SMP Thu May 12 22:03:46 UTC 2016 4.4.0-22-generic x86_64'
usb_check_and_add: found instrument vid 0x0765, pid 0x5010
Setting up the instrument
new_inst: called with path '/dev/bus/usb/001/011 (GretagMacbeth Huey)'
huey_init_coms: About to init coms
huey_init_coms: About to init USB
usb_open_port: open port '/dev/bus/usb/001/011' succeeded
huey_init_coms: Lenovo version
huey_command: Sending 'GetStatus' args '00 00 00 00 00 00 00'
huey_command: returning '45 43 43 4d 33 20' ICOM err 0x0
ccmat = 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000

ucbid = 1, cbid = 1

huey_init_coms: inited coms OK
huey_init_inst: called
huey_check_unlock: called
huey_command: Sending 'GetStatus' args '00 00 00 00 00 00 00'
huey_command: returning '45 43 43 4d 33 20' ICOM err 0x0
huey_check_unlock: unknown model 'ECCM3 '
init_inst returned 'Not expected instrument model' (Not a known Huey Model)
new_disprd failed because init_inst failed
dispcal: Error - new_disprd() failed with 'Instrument Access Failed'

Any chance this sensor can be supported?

Cheers.