Window hidden by color patch when calibrating

[pi7602]

Hi !
First of all, many thanks for the great work done in order to have DisplayCAL work again.

I use Linux KDE Neon distro.
I installed DisplayCAL yesterday.
The display and the probe i1 display pro are detected by DisplayCAL.
Problem is that when I click on “Calibrate and Caracterize”, it launch a window which says : set this window in the center of the screen.
When I click to launch the calibration, is shows different patches and then stop on a grey patch.

The window with which I would be able to tune the display is hidden by the color patch.

I’m quite new to DisplayCAL but not to caracterization software (i1).

It may be trivial for some, but is there a way to have the patch and the window apart (separated) ?

Or, maybe it shouldn’t be stuck to the grey patch ?

Thanks for your help.

Calibrite Display Pro HL on Amazon  
Disclosure: As an Amazon Associate I earn from qualifying purchases.

[pi7602]

Hi !

Finally, I found a way to have the 2 windows separated : when you click on “Calibrate and Caracterize”, even if DisplayCAL tells to set the window in the center of the screen, just drag and drop this window in order to put it anywhere else.

The patches and the measure window are then separated.

Regards,

[Author]

Posts