swapped matrix

Home › Forums › Help and Support › swapped matrix

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2015-08-12 at 20:31 #895

    tony359 SourceForge
    Member
    • Offline

    Hi,

    Is there a way to swap an existing ‘swapped matrix’ matrix without having to re-calibrate everything again?

    Thanks
    Tony

    2015-08-12 at 20:50 #896

    Florian Höch
    Administrator
    • Offline

    Yes. Go into the “Options” menu and enable “Show advanced options”. Then go to the profiling tab and set profile type to “XYZ LUT + matrix”. Finally select “Create profile from measurement data…” in the “Options” menu and choose your existing profile.

    2015-08-12 at 22:33 #897

    tony359 SourceForge
    Member
    • Offline

    Thanks a lot as usual! 🙂

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.

Log in or Register

Display Calibration and Characterization powered by ArgyllCMS