Home › Forums › Help and Support › New to calibration: couple of questions(black equalizer, icc, black crush…)
- This topic has 2 replies, 2 voices, and was last updated 6 years, 3 months ago by Florian Höch.
-
AuthorPosts
-
2018-01-24 at 21:48 #10207
AnonymousInactive- Offline
Hello. My english not perfect but i’ll try to explain my problems. I bought spyder5 elite and after some research i heard that dispcal better than native software. I saved my spyder icc profile and i tried dispcal. I liked dispcal rgb guide. I tweaked my monitor rgb settings. Anyway i checked calibrations with verification tab(spyderchecker). Dispcal icc failed. Spyder icc results better and spyder icc little bit reddish. My monitor Samsung 27CHG70. Gamut results very good. Gamut coverage: %98.7 SRGB %92.2 DCI P3 Gamut volume: %137.3 SRGB %97.2 DCI P3. But my main problem is crushed blacks. This is va panel but contrast measurements says 800-1200(depends on a configuration). My old Acer va panel 1350-5800 contrast(depends on a configuration). Samsung black equalizer didnt help contrast(it shouldnt) but weird thing is Acer black boost improved my panel contrast.
What is this black equalizer or black boost really ? It affects gamma some way. It shouldnt affect contrast as i know.
http://www.lagom.nl/lcd-test/black.php
I cant see first 6 column properly with Samsung. Should i tweak black equalizer before calibration process or after ?
If i uninstall dispcal after calibration what happens ? I need only icc profile or i need dispcal software too ?
Im really confused. Should i use dispcal or spyder elite software ? Should i tick ”Use windows display calibration” on the color management panel. Do spyder elite software adjusts kelvin ? Why spyder icc low kelvin and dispcal icc high kelvin. I set both 6500k.
I just want ICC profile: 6500k, 2.2 gamma, correct colors and no black crush. I wanna see contents as intended.
http://www.lagom.nl/lcd-test/black.php
Default black equalizer: 13: first 6 column looks bad.
Black equalizer: 10: Looks ok.(higher value darker, lower value lighter)
After spyder calibration: Same
After dispcal calibration: Every column easily visible. Even if i set black equalizer to 16.
Right now im using spyder icc and default osd rgb settings. Sypder elite software uninstalled, dispcal software installed. I reverted all dispcal calibration but i can see all black shades. I shouldnt see.
Default Acer va panel measurement 2.2 gamma setting panel osd: 6000k 2.0 gamma 1350 contrast.
Black boosted(black equalizer) acer 2.2 gamma setting panel osd: 6000k 2.2 gamma 3850 contrast.
Without blackboost but 2.4 gamma setting panel osd: 6000k 2.2 gamma 1350 contrast.
Looks like spyder5 hardware fails for contrast measurement ?
2018-01-26 at 14:10 #10231
AnonymousInactive- Offline
Additional question: How can i learn my current uncalibrated monitor kelvin and gamma ? I want choose best osd settings before calibration. Which test best and comprehensive for color accuracy ? Hope somebody can help me.
2018-01-26 at 22:20 #10237Additional question: How can i learn my current uncalibrated monitor kelvin and gamma ?
Menu “Tools” -> “Report” -> “Report on uncalibrated display device”.
-
AuthorPosts