Making Display Profiles with a Jeti 1151

[James Dinnigan]

Hi everyone,

Im just about to begin the deep dive into the world of monitor calibration, im a DIT by trade and want to expand my knowledge base on the subject.

Im just about to purchase a standard range Jeti 1151 spectro and a K10a/CR100, and before i get calman, i would like to try DisplayCAL.

I want to be able to profile my monitor with the spectro, then load the profile and calibrate with my colourimeter. I cant see anything like this on the forums here, and would like to know if its possible.

Many thanks

James

K10-A on Amazon  
Disclosure: As an Amazon Associate I earn from qualifying purchases.

[Vincent]

You “profile” the colorimeter with the spectro for that monitor.
Menu: Tools, correction, create colorimeter correction, CCMX type (matrix). MEasure with spectro, then measure bellow with colorimeter, let displaycal create 3×3 XYZ to XYZ matrix correction.
Then on 1st tab choose colorimeter and yiur newly created correction.

As an optional tasl you can create a CCSS correction for that display, so users with i1d3 colorimeter can use it for same model of display.

[DaniJ]

Worth pointing out that some high-end devices like CR100 are not supported by argyll/displaycal.

Might be time to go the comercial spftware route like Colourspace (the more expensive licenses are required for high end gear).

[Author]

Posts