i1 Display 2 doesn’t seem to be detected?

[CLFry]

I have an old i1 Display 2, which if I’m understanding correctly, should be compatible according to https://www.argyllcms.com/doc/instruments.html#i1d
The problem is that the device isn’t showing up in the “Instrument” selection in DisplayCAL. However, it is detected by the i1 Match 3 software that came with the colorimeter, so there is a driver installed…

Thoughts?

[Vincent]

All non i1d3 need to use ArgyllUSB driver, which is different from vendor driver. You’ll have to switch drivers as explained in doc.
Anyway, it’s too old and maybe too degraded to be used on any modern display.

Calibrite Display Pro HL on Amazon  
Disclosure: As an Amazon Associate I earn from qualifying purchases.

[Author]

Posts