Help with callibration of my eizo CG2700x

[Lizzie]

Thank you Vincent, I finally managed to convert the EDR to ccss via oeminst!

New callibration report, with RG_Phosphor_Family_25Jul12_CG319X.edr in CN7, no compensation, settings:

Brightness: 100 cd/m^2,
Black level: minimum
White point: D65
Gamma 2.4
Priority: Standard
Gamut: Native

Used Stuart’s settings for displaycal (https://www.youtube.com/watch?v=KQyuJ-EL3DA) and converted RG_Phosphor_Family_25Jul12_CG319X.ccss as correction.

Any advice to what I should pay attention to in the measurement report? Thank you so much for the help so far Vincent!

Attachments:

You must be logged in to view attached files.

[Vincent]

All is ok.
A more detalied report can be generated by “ISO_12646-2008_color_accuracy_and_gray_balance”. I like this over 2015 bc you can take a fast look on grey ramp. On a CS or CG Eizo this a no issue, but in other widegamuts from Dell / Benq / Asus… and their failty HW calibration software…
It’s the same report as yours but with more patches.

[Marek Frankiewicz]

Hi, sorry, just a side question: following the instruction from the EIZO APAC, if you have your EIZO connected only to Blackmagic Design Decklink via HDMI and with PC only via usb, to do the first calibration with CG (before Displaycal) you need to connect the monitor via another HDMI or Displayport and change the source to it in order to be able to move patterns to this monitor?

[Author]

Posts