- This topic has 2 replies, 2 voices, and was last updated 6 years, 2 months ago by
.
-
Posts
-
Here’s my log file. Thanks a bunch!
23:07:55,354 DisplayCAL: Reached EOF (OK)
23:07:55,358 …aborted.
23:08:17,946 ——————————————————————————–
23:08:17,947 Calibrate & profile
23:08:17,986
23:08:18,055 Detecting output levels range…
23:08:18,065 ——————————————————————————–
23:08:18,066 Session log: 0_16
23:08:18,066
23:08:18,068 Working directory:
23:08:18,069 c:\
23:08:18,069 users\
23:08:18,071 ambers~1\
23:08:18,072 appdata\
23:08:18,072 local\
23:08:18,073 temp\
23:08:18,075 DisplayCAL-rtocmy\
23:08:18,075
23:08:18,076 Command line:
23:08:18,078 C:\Users\Amber Studios 1\Downloads\Argyll_V2.0.0\bin\dispread.exe
23:08:18,079 -v
23:08:18,081 -D8
23:08:18,082 -k
23:08:18,082 “C:\Program Files (x86)\DisplayCAL\linear.cal”
23:08:18,085 -d1
23:08:18,085 -c1
23:08:18,085 -yn
23:08:18,086 “-P0.498994974874,0.490196078431,1.5”
23:08:18,088 -F
23:08:18,088 0_16
23:08:18,089
23:08:18,697 DisplayCAL: Starting interaction with subprocess
23:08:18,716 get_a_display called with ix 0
23:08:18,717 MonitorEnumProc() called with hMonitor = 0x10001
23:08:18,717 MonitorEnumProc() set initial monitor info: 0,0 2560,1080 name ‘\\.\DISPLAY1’
23:08:18,717 MonitorEnumProc() called with hMonitor = 0x10003
23:08:18,719 MonitorEnumProc() set initial monitor info: 376,-1080 1920,1080 name
23:08:18,719 ‘\\.\DISPLAY2’
23:08:18,719 get_displays about to get monitor information for 0
23:08:18,720 Mon 0, name ‘\\.\DISPLAY1\Monitor0’
23:08:18,720 Mon 0, string ‘LG ULTRAWIDE(HDMI)’
23:08:18,720 Mon 0, flags 0x3
23:08:18,720 Mon 0, id ‘MONITOR\GSM59F1\{4d36e96e-e325-11ce-bfc1-08002be10318}\0001’
23:08:18,720 Mon 0, key
23:08:18,720 ‘\Registry\Machine\System\CurrentControlSet\Control\Class\{4d36e96e-e325-11ce-bfc1-08002be10318}\0001′
23:08:18,720 c1-08002be10318}\0001’
23:08:18,721 EnumDisplayDevices failed on ‘\\.\DISPLAY1’ Mon = 1
23:08:18,721 get_displays added description ‘DISPLAY1, at 0, 0, width 2560, height 1080
23:08:18,721 (Primary Display)’ to display 0
23:08:18,721 get_displays about to get monitor information for 1
23:08:18,723 Mon 0, name ‘\\.\DISPLAY2\Monitor0’
23:08:18,723 Mon 0, string ‘Generic PnP Monitor’
23:08:18,723 Mon 0, flags 0x3
23:08:18,723 Mon 0, id ‘MONITOR\SHP115C\{4d36e96e-e325-11ce-bfc1-08002be10318}\0003’
23:08:18,723 Mon 0, key
23:08:18,723 ‘\Registry\Machine\System\CurrentControlSet\Control\Class\{4d36e96e-e325-11ce-bfc1-08002be10318}\0003′
23:08:18,723 c1-08002be10318}\0003’
23:08:18,724 EnumDisplayDevices failed on ‘\\.\DISPLAY2’ Mon = 1
23:08:18,724 get_displays added description ‘DISPLAY2, at 376, -1080, width 1920, height
23:08:18,724 1080’ to display 1
23:08:18,726 Selected ix 0 ‘\\.\DISPLAY1′ DISPLAY1, at 0, 0, width 2560, height 1080
23:08:18,726 (Primary Display)’
23:08:18,726 Argyll ‘V2.0.0’ Build ‘MSWin 64 bit’ System ‘Windows V10.0 SP 0’
23:08:18,727 new_icompath: called with mask 0x1ffff
23:08:18,729 icoms_refresh_paths: called with mask = 0x1ffff
23:08:18,730 icoms_refresh_paths: looking for HID device
23:08:18,730 hid_get_paths: called
23:08:18,732 found HID device
23:08:18,732 ‘\\?\hid#vid_1532&pid_0042#7&176957f8&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}’,
23:08:18,732 30}’,
23:08:18,732 inst 1 but not one we’re looking for
23:08:18,733 found HID device
23:08:18,733 ‘\\?\hid#vid_056a&pid_033b&col01#7&324c1943&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}’,
23:08:18,733 11000030}’,
23:08:18,733 inst 2 but not one we’re looking for
23:08:18,733 found HID device
23:08:18,733 ‘\\?\hid#vid_056a&pid_033b&col02#7&324c1943&0&0001#{4d1e55b2-f16f-11cf-88cb-001111000030}’,
23:08:18,733 11000030}’,
23:08:18,733 inst 3 but not one we’re looking for
23:08:18,733 found HID device
23:08:18,733 ‘\\?\hid#vid_056a&pid_033b&col03#7&324c1943&0&0002#{4d1e55b2-f16f-11cf-88cb-001111000030}’,
23:08:18,733 11000030}’,
23:08:18,733 inst 4 but not one we’re looking for
23:08:18,734 found HID device
23:08:18,734 ‘\\?\hid#vid_056a&pid_033b&col04#7&324c1943&0&0003#{4d1e55b2-f16f-11cf-88cb-001111000030}’,
23:08:18,734 11000030}’,
23:08:18,734 inst 5 but not one we’re looking for
23:08:18,734 found HID device
23:08:18,734 ‘\\?\hid#vid_056a&pid_033b&col05#7&324c1943&0&0004#{4d1e55b2-f16f-11cf-88cb-001111000030}’,
23:08:18,734 11000030}’,
23:08:18,734 inst 6 but not one we’re looking for
23:08:18,734 found HID device
23:08:18,734 ‘\\?\hid#vid_1e71&pid_170e#7&3375cd52&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}’,
23:08:18,734 30}’,
23:08:18,734 inst 7 but not one we’re looking for
23:08:18,736 found HID device
23:08:18,736 ‘\\?\hid#vid_0c45&pid_5004&mi_01&col01#8&2df476a3&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}’,
23:08:18,736 b-001111000030}’,
23:08:18,736 inst 8 but not one we’re looking for
23:08:18,736 found HID device
23:08:18,736 ‘\\?\hid#vid_0765&pid_5020#7&31d3e0af&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}’,
23:08:18,736 30}’,
23:08:18,736 inst 9 that we’re looking for
23:08:18,736 icompaths_add_hid ‘(null)’ got dctype 0x0
23:08:18,736 icompath_set_usb ‘hid:/9 (X-Rite i1 DisplayPro, ColorMunki Display)’ returning
23:08:18,736 dctype 0x10004
23:08:18,737 found HID device
23:08:18,737 ‘\\?\hid#vid_0c45&pid_5004&mi_01&col02#8&2df476a3&0&0001#{4d1e55b2-f16f-11cf-88cb-001111000030}’,
23:08:18,737 b-001111000030}’,
23:08:18,737 inst 10 but not one we’re looking for
23:08:18,739 found HID device
23:08:18,739 ‘\\?\hid#vid_0c45&pid_5004&mi_01&col03#8&2df476a3&0&0002#{4d1e55b2-f16f-11cf-88cb-001111000030}’,
23:08:18,739 b-001111000030}’,
23:08:18,739 inst 11 but not one we’re looking for
23:08:18,740 found HID device
23:08:18,740 ‘\\?\hid#vid_0c45&pid_5004&mi_01&col04#8&2df476a3&0&0003#{4d1e55b2-f16f-11cf-88cb-001111000030}’,
23:08:18,740 b-001111000030}’,
23:08:18,740 inst 12 but not one we’re looking for
23:08:18,740 found HID device
23:08:18,740 ‘\\?\hid#vid_1532&pid_0042&did_0000&mi_02#8&3903d663&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}’,
23:08:18,740 88cb-001111000030}’,
23:08:18,740 inst 13 but not one we’re looking for
23:08:18,740 found HID device
23:08:18,740 ‘\\?\hid#vid_0c45&pid_5004&mi_00#8&589c8da&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}’,
23:08:18,740 1000030}’,
23:08:18,740 inst 14 but not one we’re looking for
23:08:18,742 icoms_get_paths: returning 1 paths and ICOM_OK
23:08:18,742 icoms_refresh_paths: looking for USB device
23:08:18,743 usb_get_paths opening device ‘\\.\libusb0-0001’
23:08:18,743 usb_get_paths opening device ‘\\.\libusb0-0002’
23:08:18,743 usb_get_paths opening device ‘\\.\libusb0-0003’
23:08:18,743 usb_get_paths opening device ‘\\.\libusb0-0004’
23:08:18,743 usb_get_paths opening device ‘\\.\libusb0-0005’
23:08:18,744 usb_get_paths opening device ‘\\.\libusb0-0006’
23:08:18,744 usb_get_paths opening device ‘\\.\libusb0-0007’
23:08:18,744 usb_get_paths opening device ‘\\.\libusb0-0008’
23:08:18,746 usb_get_paths opening device ‘\\.\libusb0-0009’
23:08:18,746 usb_get_paths opening device ‘\\.\libusb0-0010’
23:08:18,746 usb_get_paths opening device ‘\\.\libusb0-0011’
23:08:18,746 usb_get_paths opening device ‘\\.\libusb0-0012’
23:08:18,746 usb_get_paths opening device ‘\\.\libusb0-0013’
23:08:18,746 usb_get_paths opening device ‘\\.\libusb0-0014’
23:08:18,747 usb_get_paths opening device ‘\\.\libusb0-0015’
23:08:18,747 usb_get_paths opening device ‘\\.\libusb0-0016’
23:08:18,747 icoms_refresh_paths: now got 1 paths
23:08:18,749 icoms_refresh_paths: looking for serial ports
23:08:18,749 serial_get_paths: called with mask = 131071
23:08:18,750 serial_get_paths: looking up the registry for serial ports
23:08:18,750 serial_get_paths: There don’t appear to be any serial ports
23:08:18,750 icoms_refresh_paths: we now have 1 devices and are about to sort them
23:08:18,750 icompaths_make_dslists ‘hid:/9 (X-Rite i1 DisplayPro, ColorMunki Display)’
23:08:18,750 dctype 0x10004
23:08:18,752 icoms_refresh_paths: returning 1 paths and ICOM_OK
23:08:18,752 Number of patches = 3
23:08:18,753 Setting up the instrument
23:08:18,753 new_inst: called with path ‘hid:/9 (X-Rite i1 DisplayPro, ColorMunki Display)’
23:08:18,753 type ‘i1D3’
23:08:18,753 new_icoms ‘hid:/9 (X-Rite i1 DisplayPro, ColorMunki Display)’ itype ‘i1D3’
23:08:18,753 dctype 0x10004
23:08:18,753 icom_copy_path_to_icom ‘hid:/9 (X-Rite i1 DisplayPro, ColorMunki Display)’
23:08:18,753 returning dctype 0x10004
23:08:18,753 i1d3_init_coms: called
23:08:18,753 i1d3_init_coms: About to init HID
23:08:18,753 icoms_set_hid_port: About to set HID port characteristics
23:08:18,755 hid_open_port: about to open HID port ‘hid:/9 (X-Rite i1 DisplayPro, ColorMunki
23:08:18,755 Display)’ path ‘\\?\hid#vid_0765&pid_5020#7&31d3e0af&0&0000#{4d1e55b2-f16f-11cf-
23:08:18,755 88cb-001111000030}’
23:08:18,862 hid_open_port: Failed to open path
23:08:18,862 ‘\\?\hid#vid_0765&pid_5020#7&31d3e0af&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}’
23:08:18,862 30}’
23:08:18,862 with err 18
23:08:18,868 hid_open_port: Failed to open path
23:08:18,868 ‘\\?\hid#vid_0765&pid_5020#7&31d3e0af&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}’
23:08:18,868 30}’
23:08:18,868 with err 18
23:08:18,868 i1d3_init_coms: set_hid_port failed ICOM err 0x20000
23:08:18,869 init_coms returned ‘Communications failure’ (Communications failure)
23:08:18,871 new_disprd failed because init_coms failed
23:08:18,871 icoms_del: called
23:08:18,872 dispread: Error – new_disprd failed with ‘Instrument Access Failed’
23:08:18,872
23:08:18,984 DisplayCAL: Reached EOF (OK)
23:08:18,986 …aborted.Calibrite Display Pro HL on Amazon
Disclosure: As an Amazon Associate I earn from qualifying purchases.23:08:18,869 init_coms returned ‘Communications failure’ (Communications failure)
USB problem, most likely. Can you try different port(s) or a (powered, ideally USB 2.0) hub?
I’m using a gigabyte ax370 gaming 5 board. The only usb 2.0 ports i have are the ones on the case (nzxt s340 elite). Here’s my updated log.
02:58:50,010 Calibrate & profile
02:58:51,621 Detecting output levels range…
02:58:51,631 ——————————————————————————–
02:58:51,631 Session log: 0_16
02:58:51,631
02:58:51,631 Working directory:
02:58:51,632 c:\
02:58:51,632 users\
02:58:51,632 ambers~1\
02:58:51,634 appdata\
02:58:51,634 local\
02:58:51,634 temp\
02:58:51,634 DisplayCAL-85w4bp\
02:58:51,634
02:58:51,634 Command line:
02:58:51,635 C:\Users\Amber Studios 1\Downloads\Argyll_V2.0.0\bin\dispread.exe
02:58:51,638 -v
02:58:51,638 -D8
02:58:51,638 -k
02:58:51,640 “C:\Program Files (x86)\DisplayCAL\linear.cal”
02:58:51,641 -d1
02:58:51,641 -c1
02:58:51,642 -yn
02:58:51,644 “-P0.498994974874,0.490196078431,1.5”
02:58:51,644 -F
02:58:51,644 0_16
02:58:51,645
02:58:52,298 DisplayCAL: Starting interaction with subprocess
02:58:52,332 get_a_display called with ix 0
02:58:52,332 MonitorEnumProc() called with hMonitor = 0x10001
02:58:52,332 MonitorEnumProc() set initial monitor info: 0,0 2560,1080 name ‘\\.\DISPLAY1’
02:58:52,332 MonitorEnumProc() called with hMonitor = 0x10003
02:58:52,334 MonitorEnumProc() set initial monitor info: 2560,0 1920,1080 name ‘\\.\DISPLAY2’
02:58:52,334 get_displays about to get monitor information for 0
02:58:52,334 Mon 0, name ‘\\.\DISPLAY1\Monitor0’
02:58:52,335 Mon 0, string ‘LG ULTRAWIDE(HDMI)’
02:58:52,335 Mon 0, flags 0x3
02:58:52,335 Mon 0, id ‘MONITOR\GSM59F1\{4d36e96e-e325-11ce-bfc1-08002be10318}\0005’
02:58:52,335 Mon 0, key
02:58:52,335 ‘\Registry\Machine\System\CurrentControlSet\Control\Class\{4d36e96e-e325-11ce-bfc1-08002be10318}\0005′
02:58:52,335 c1-08002be10318}\0005’
02:58:52,335 EnumDisplayDevices failed on ‘\\.\DISPLAY1’ Mon = 1
02:58:52,336 get_displays added description ‘DISPLAY1, at 0, 0, width 2560, height 1080
02:58:52,336 (Primary Display)’ to display 0
02:58:52,336 get_displays about to get monitor information for 1
02:58:52,336 Mon 0, name ‘\\.\DISPLAY2\Monitor0’
02:58:52,338 Mon 0, string ‘Dell S2440L(HDMI)’
02:58:52,338 Mon 0, flags 0x3
02:58:52,338 Mon 0, id ‘MONITOR\DELA08B\{4d36e96e-e325-11ce-bfc1-08002be10318}\0004’
02:58:52,338 Mon 0, key
02:58:52,338 ‘\Registry\Machine\System\CurrentControlSet\Control\Class\{4d36e96e-e325-11ce-bfc1-08002be10318}\0004′
02:58:52,338 c1-08002be10318}\0004’
02:58:52,338 EnumDisplayDevices failed on ‘\\.\DISPLAY2’ Mon = 1
02:58:52,338 get_displays added description ‘DISPLAY2, at 2560, 0, width 1920, height 1080’
02:58:52,338 to display 1
02:58:52,338 Selected ix 0 ‘\\.\DISPLAY1′ DISPLAY1, at 0, 0, width 2560, height 1080
02:58:52,338 (Primary Display)’
02:58:52,339 Argyll ‘V2.0.0’ Build ‘MSWin 64 bit’ System ‘Windows V10.0 SP 0’
02:58:52,339 new_icompath: called with mask 0x1ffff
02:58:52,341 icoms_refresh_paths: called with mask = 0x1ffff
02:58:52,341 icoms_refresh_paths: looking for HID device
02:58:52,341 hid_get_paths: called
02:58:52,342 found HID device
02:58:52,342 ‘\\?\hid#vid_0765&pid_5020#7&32e2ebb&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}’,
02:58:52,342 0}’,
02:58:52,342 inst 1 that we’re looking for
02:58:52,342 icompaths_add_hid ‘(null)’ got dctype 0x0
02:58:52,342 icompath_set_usb ‘hid:/1 (X-Rite i1 DisplayPro, ColorMunki Display)’ returning
02:58:52,342 dctype 0x10004
02:58:52,345 found HID device
02:58:52,345 ‘\\?\hid#vid_1532&pid_0042#7&176957f8&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}’,
02:58:52,345 30}’,
02:58:52,345 inst 2 but not one we’re looking for
02:58:52,346 found HID device
02:58:52,346 ‘\\?\hid#vid_056a&pid_033b&col01#7&324c1943&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}’,
02:58:52,346 11000030}’,
02:58:52,346 inst 3 but not one we’re looking for
02:58:52,348 found HID device
02:58:52,348 ‘\\?\hid#vid_056a&pid_033b&col02#7&324c1943&0&0001#{4d1e55b2-f16f-11cf-88cb-001111000030}’,
02:58:52,348 11000030}’,
02:58:52,348 inst 4 but not one we’re looking for
02:58:52,351 found HID device
02:58:52,351 ‘\\?\hid#vid_056a&pid_033b&col03#7&324c1943&0&0002#{4d1e55b2-f16f-11cf-88cb-001111000030}’,
02:58:52,351 11000030}’,
02:58:52,351 inst 5 but not one we’re looking for
02:58:52,352 found HID device
02:58:52,352 ‘\\?\hid#vid_056a&pid_033b&col04#7&324c1943&0&0003#{4d1e55b2-f16f-11cf-88cb-001111000030}’,
02:58:52,352 11000030}’,
02:58:52,352 inst 6 but not one we’re looking for
02:58:52,354 found HID device
02:58:52,354 ‘\\?\hid#vid_056a&pid_033b&col05#7&324c1943&0&0004#{4d1e55b2-f16f-11cf-88cb-001111000030}’,
02:58:52,354 11000030}’,
02:58:52,354 inst 7 but not one we’re looking for
02:58:52,355 found HID device
02:58:52,355 ‘\\?\hid#vid_1e71&pid_170e#7&3375cd52&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}’,
02:58:52,355 30}’,
02:58:52,355 inst 8 but not one we’re looking for
02:58:52,355 found HID device
02:58:52,355 ‘\\?\hid#vid_0c45&pid_5004&mi_01&col01#8&2df476a3&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}’,
02:58:52,355 b-001111000030}’,
02:58:52,355 inst 9 but not one we’re looking for
02:58:52,355 found HID device
02:58:52,355 ‘\\?\hid#vid_0c45&pid_5004&mi_01&col02#8&2df476a3&0&0001#{4d1e55b2-f16f-11cf-88cb-001111000030}’,
02:58:52,355 b-001111000030}’,
02:58:52,355 inst 10 but not one we’re looking for
02:58:52,355 found HID device
02:58:52,355 ‘\\?\hid#vid_0c45&pid_5004&mi_01&col03#8&2df476a3&0&0002#{4d1e55b2-f16f-11cf-88cb-001111000030}’,
02:58:52,355 b-001111000030}’,
02:58:52,355 inst 11 but not one we’re looking for
02:58:52,355 found HID device
02:58:52,355 ‘\\?\hid#vid_0c45&pid_5004&mi_01&col04#8&2df476a3&0&0003#{4d1e55b2-f16f-11cf-88cb-001111000030}’,
02:58:52,355 b-001111000030}’,
02:58:52,355 inst 12 but not one we’re looking for
02:58:52,355 found HID device
02:58:52,355 ‘\\?\hid#vid_1532&pid_0042&did_0000&mi_02#8&3903d663&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}’,
02:58:52,355 88cb-001111000030}’,
02:58:52,355 inst 13 but not one we’re looking for
02:58:52,357 found HID device
02:58:52,357 ‘\\?\hid#vid_0c45&pid_5004&mi_00#8&589c8da&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}’,
02:58:52,357 1000030}’,
02:58:52,357 inst 14 but not one we’re looking for
02:58:52,357 icoms_get_paths: returning 1 paths and ICOM_OK
02:58:52,357 icoms_refresh_paths: looking for USB device
02:58:52,358 usb_get_paths opening device ‘\\.\libusb0-0001’
02:58:52,358 usb_get_paths opening device ‘\\.\libusb0-0002’
02:58:52,358 usb_get_paths opening device ‘\\.\libusb0-0003’
02:58:52,358 usb_get_paths opening device ‘\\.\libusb0-0004’
02:58:52,358 usb_get_paths opening device ‘\\.\libusb0-0005’
02:58:52,359 usb_get_paths opening device ‘\\.\libusb0-0006’
02:58:52,359 usb_get_paths opening device ‘\\.\libusb0-0007’
02:58:52,359 usb_get_paths opening device ‘\\.\libusb0-0008’
02:58:52,361 usb_get_paths opening device ‘\\.\libusb0-0009’
02:58:52,361 usb_get_paths opening device ‘\\.\libusb0-0010’
02:58:52,361 usb_get_paths opening device ‘\\.\libusb0-0011’
02:58:52,361 usb_get_paths opening device ‘\\.\libusb0-0012’
02:58:52,361 usb_get_paths opening device ‘\\.\libusb0-0013’
02:58:52,361 usb_get_paths opening device ‘\\.\libusb0-0014’
02:58:52,362 usb_get_paths opening device ‘\\.\libusb0-0015’
02:58:52,362 usb_get_paths opening device ‘\\.\libusb0-0016’
02:58:52,362 icoms_refresh_paths: now got 1 paths
02:58:52,364 icoms_refresh_paths: looking for serial ports
02:58:52,365 serial_get_paths: called with mask = 131071
02:58:52,365 serial_get_paths: looking up the registry for serial ports
02:58:52,367 serial_get_paths: There don’t appear to be any serial ports
02:58:52,368 icoms_refresh_paths: we now have 1 devices and are about to sort them
02:58:52,368 icompaths_make_dslists ‘hid:/1 (X-Rite i1 DisplayPro, ColorMunki Display)’
02:58:52,368 dctype 0x10004
02:58:52,368 icoms_refresh_paths: returning 1 paths and ICOM_OK
02:58:52,371 Number of patches = 3
02:58:52,371 Setting up the instrument
02:58:52,371 new_inst: called with path ‘hid:/1 (X-Rite i1 DisplayPro, ColorMunki Display)’
02:58:52,371 type ‘i1D3’
02:58:52,372 new_icoms ‘hid:/1 (X-Rite i1 DisplayPro, ColorMunki Display)’ itype ‘i1D3’
02:58:52,372 dctype 0x10004
02:58:52,374 icom_copy_path_to_icom ‘hid:/1 (X-Rite i1 DisplayPro, ColorMunki Display)’
02:58:52,374 returning dctype 0x10004
02:58:52,375 i1d3_init_coms: called
02:58:52,375 i1d3_init_coms: About to init HID
02:58:52,378 icoms_set_hid_port: About to set HID port characteristics
02:58:52,378 hid_open_port: about to open HID port ‘hid:/1 (X-Rite i1 DisplayPro, ColorMunki
02:58:52,378 Display)’ path ‘\\?\hid#vid_0765&pid_5020#7&32e2ebb&0&0000#{4d1e55b2-f16f-11cf-8
02:58:52,378 8cb-001111000030}’
02:58:52,433 hid_open_port: Failed to open path
02:58:52,433 ‘\\?\hid#vid_0765&pid_5020#7&32e2ebb&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}’
02:58:52,433 0}’
02:58:52,433 with err 18
02:58:52,433 hid_open_port: Failed to open path
02:58:52,433 ‘\\?\hid#vid_0765&pid_5020#7&32e2ebb&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}’
02:58:52,433 0}’
02:58:52,433 with err 18
02:58:52,433 i1d3_init_coms: set_hid_port failed ICOM err 0x20000
02:58:52,434 init_coms returned ‘Communications failure’ (Communications failure)
02:58:52,434 new_disprd failed because init_coms failed
02:58:52,434 icoms_del: called
02:58:52,434 dispread: Error – new_disprd failed with ‘Instrument Access Failed’
02:58:52,434
02:58:52,540 DisplayCAL: Reached EOF (OK)
02:58:52,543 …aborted.Cheers!
