- This topic has 18 replies, 3 voices, and was last updated 1 month, 1 week ago by
.
-
Posts
-
Thank you!
I’ve done the colornavigator bit and am going to run another calibration overnight. Should I be setting Gamma 2.4 to “Absolute” or “Relative” and should I be enabling black point compensation?One other thing:
When using the previous spectral correction, the Delta-E in whitepoint shown in displayCAL was about 0.4 after ColorNavigator correction.
With the new converted EDR it’s about 0.8.I can get this down to about 0.2 with some manual adjustment on the monitor but does this mean there’s a mismatch somewhere?
Thank you!
I’ve done the colornavigator bit and am going to run another calibration overnight. Should I be setting Gamma 2.4 to “Absolute” or “Relative” and should I be enabling black point compensation?Try Custom 2.4 relative 100% offset and see if it is what you expected (that shpuld be able to pass a Calman “2.4 power curve” Quick Analysis workflow.
One other thing:
When using the previous spectral correction, the Delta-E in whitepoint shown in displayCAL was about 0.4 after ColorNavigator correction.
With the new converted EDR it’s about 0.8.I can get this down to about 0.2 with some manual adjustment on the monitor but does this mean there’s a mismatch somewhere?
Meaningless difference given the variation of the probe & its firmware.
