Calibrating a Sony BVM-L230. Panel Type?

[speedy]

Does anyone know what CCSS I’d ideally want to use with a Sony BVM-L230 for my i1d3 colorimeter?

it’s not clear to me what tech this panel has since Sony just refers to it as a “High-Purity Precision LED Backlight LCD”.

Appreciate any help! Thanks!

Calibrite Display Pro HL on Amazon  
Disclosure: As an Amazon Associate I earn from qualifying purchases.

[Vincent]

EDITED: forget what I wrote, I did not see “OLED” in thread title. If it is an RGB OLED choose one of the bundled samples:

OLEDFamily_20Jul12.ccss
OLEDFamily_28Aug18.ccss

• This reply was modified 2 years, 8 months ago by Vincent.
• This reply was modified 2 years, 8 months ago by Vincent.

[speedy]

It’s an LCD (unsure what type) with some form of LED backlighting, not an OLED. Here’s a Sony spec sheet: https://www.broadcaststore.com/pdf/model/816498/BVM-L230%20Brochure.pdf

[Vincent]

My fault , I mixed your thread with this one

Correction setting for OLED monitors

and I thought that I replied you there so I edited.

Regarding yours, the original post before I edited:
get EDID primaries (file create profile form edid) or measure them (for example uncalibrated display report). If you measure them it should be native gamut, not Rec709 preset. Those primaries will give you a hint for 1 or 2 backlight tech families depending where native green or red are located..

[speedy]

How do you get EDID primaries from an EDID report?

[Vincent]

get EDID primaries (file create profile form edid)

or

measure them (for example uncalibrated display report).

(unless that has changed, I remember that it wrote primaries XYZ in the log)

[Author]

Posts