Hi, I just wanted to make sure my approach is correct. I have a late 13 2016 Macbook Pro with touch bar, and I am using the x-rite i1display pro.
Settings: Laptop (Gamma 2.2)
Correction: Auto
I checked interactive display adjustment
Whitepoint: I set to 120
White level: 6500
tone curve :2.2
Calibration speed: slowest
I hit calibrate and profile.
During the interactive display adjustment. I then manually adjust the brightness to 120.
Since it is a laptop, I am not able to adjust the RGB.
Then I closed out the calibration, and unchecked interactive display adjustment, and left whitepoint at as measured.
I then ran the calibration.
After the calibration was complete, I tried the interactive display adjustment, the whitepoint was reading at 120, but the levels for RGB were still off, too much blue. Shouldn’t the calibration have fixed this?
Thanks
Steve
-
This topic was modified 6 years, 6 months ago by hasteveha.
-
This topic was modified 6 years, 6 months ago by hasteveha.