Joel

  • Hi

    If I’ve a big piece of advice to give you and if you can afford it, naturally, opt for a more specific tool. The SpyderX for exemple.

    Enjoyed!

  • These monitors are both plugged into my laptop; one directly into the HDMI port and another one is using DisplayPort through USB-C through a docking station.

    It’s only mine. But I guess it’s due to the different signal path. Reverse the monitors first to decriminalised those. Then you will have the source, the connections to check.

    Otherwise, I…[Read more]

  • Hi,

    Never bought on the alibaba site. I do research on the Internet and I buy from the highest bidder, on known sites and safe.

    I pay with PayPal to be sure of being refunded, when I’ve a doubt.

    Good luck

  • Hi,

    I have replaced panels several times without problem.

    For manufacturer’s specifications, it’s more complicated.

    However, you will have to pay attention for the dead pixels and the guarantees associated with its.

    Naturally, you will need to calibrate your monitor, to see if you you’re getting close to your previous characteristics.

    Good…[Read more]

  • Hi,

    Quand le SpyderX n’a pas de correction à importer. Est-il mieux ou moins bien. Peut-on faire des mesures précises sur une dalle OLED (LG55C9, par EXEMPLE) ?

    Merci pour votre réponse.

  • Joel replied to the topic UAC in the forum Help and Support 2 weeks, 3 days ago

    Florian, the problem is that  the UAC ask him for authorisation at each restart. I never had it with DisplayCal.

    So, I assumed that he will had intervene manually in the process, since some antiviruses can interfere with normal operation.

    However, thank you for your expert vision.

    Thanks

  • Normally, you install the Spyder5 X software and then you search for corrections in DisplayCal. And the turn is day. It finds it as a big one. Alone!

  • Disconnect your probe from your computer.

    Uninstall the current driver that appears to be in errors.

    Follow the procedure as indicated in the DisplayCal documentation.

    Windows only : If your measurement probe isn’t a ColorMunki Display, I1 Display Pro, Huey, ColorHug, Specbos, Spectraval ou K-10, you will need to install a driver specific to…[Read more]

  • Rechecking won’t cost more. I invite you to recheck from the start. Specially the installation of the drivers.

  • Joel replied to the topic UAC in the forum Help and Support 3 weeks, 6 days ago

    Vous devez désactiver votre anti-virus pour faire ces manipulations sensibles.

    Best Regards,

  • Joel replied to the topic UAC in the forum Help and Support 3 weeks, 6 days ago

    Hi,

    Make sure this application is authorized by following : Control panel  > System and security > Windows Defender firewall > authorized Applications.

    Or type on the search bar, at the bottom, left of the screen, next to the start button : authorize an application via the Firewall.

    Good luck!

     

     

  • Joel replied to the topic Spyder 3 in the forum Help and Support 1 month ago

    Hi,

     

    You should start over from the beginning by scrupulously following the online help.

    Installing the drivers is essential for recognition of the probe.

    Windows only: if your measurement probe is not ColorMunki Display, i1 Display Pro, Huey, ColorHug, specbos, spectraval ou K-10, you will need to install a driver specific to Argyll. By…[Read more]

  • Hi,

    It’s better to let DisplayCal to manage profile rather than Windows. This issstarted in the DisplayCal manual. The choice of screen and the driver must be made with care depending of the monitor or screen. You have not given the specifications of the screen.

  • Joel started the topic Calibrate my TV in the forum Help and Support 1 month, 1 week ago

    Hi,

    I would like to calibrate my Samsung  QE55Q70R TV with color target BT2020 or BT2020-P3.  How should I do with your software?  I have a Spyder5.

    Thanks for your help.

    Joel

Display Calibration and Characterization powered by ArgyllCMS