Just wanted to ask if patch sizes make a difference in situations outside of ABL.
For example, if the lcd is black, does making the patch size smaller cause more heating of the lcd layer as the darkened portion blocks the photons, somehow altering the color behavior.
Or possibly if the room is very reflective and the monitor is near a wall,…[Read more]
So it’s this specific statement that has me replying here…
What are the mismatched environments?
What’s a “web artist”, and what distinguishes his process?
How do they compensate?
How does Firefox color management differ from other applications?
I ask all this because I suspect you may be struggling with the details of your specific display r…
So, a web artist working in this mismatched environment must be compensating for it, I find that may websites look more -correct- without firefox’s colormanagement turned on.
That’s only true if you do not have a wide-gamut display though.
I’m speaking mainly about the tone curve and the intended -look-, I agree the saturation is always over…[Read more]
I don’t think most web -audiences- are looking at the srgb tone curve.
All the recent TVs and Monitors I’ve pluged the PC into do not exhibit the srgb tone curve natively. They’re all more similar to the 2.2gamma (relative) w/ black output offset.
I don’t know precisely when device makers made the switch, but srgb is definitely not the standard…[Read more]
I’ve recently turned on the Firefox color management fulltime for a week. I noticed that apart from most images looking less saturated, which should be accurate, the Tone is also much lighter. Alot of websites/ images seem to pick up quicker from black which overall looks to have much less depth.
Now, if creators are targeting a mainly…[Read more]
Indeed the whole setup is buggy. I just tried it, and testing with madvr, it will blink in and out of grey-blacks.
Either this adapter is just wrong, or the TV in conjunction with the adapter causes the bork.
I don’t have the option to change to full range, it’s not in my gpu menu when the adapter is connected, only if I use hdmi direct, but the…[Read more]
I have a displayport to hdmi adapter which seems to only allow 16-235 (4K 60hz). If I am using this adapter, should I set displaycal to calibrate for 16-235 instead of 0-255 ?
Would calibrating/profiling under 16-235 affect other applications which are not aware that it’s using -limited- ?
I can’t switch to full with this adapter attached.
asdfage wegagag replied to the topic How to enable dithering on Nvidia GeForce with Windows OS in the forum Help and Support 2 months, 1 week ago
Is there a way to enable this on optimus laptops ?, In my -Display Database-, I only see adapter, and connector, which entry is it ?
Srgb is not the u2410 monitor’s native mode. keep that in mind, it emulates srgb
Standard mode (which is wide gamut) is the native mode, however the white point is wrong, adjustable in service menu. The 6500k Label in the service menu is the whitepoint RGB for the -Standard mode- from the regular color selection menu.
The RGB white point for…[Read more]
I’m pretty sure the error is in your settings, tomshardware review ,they got 2400:1 contrast out of their set after calibration.
Set it to the settings in their article.
Make sure your GPU color options are default as well. and if nvidia, that digital vibrancy setting is at default.
Look for a setting in there that has to do with dynamic contrast, like game mode, or something that sounds like it would affect black point.
Based on online review this monitor should be a VA panel with ~3000:1 contrast.
If your meter reads 1000:1 something is wrong.
Take screenshots of the settings in displaycal you used for this calibration as well.
Here’s the udated report with the Colormunki.
I chose D65 and 2.2 Gamma – targeted 120cdm Light.
Something is wrong with the calibration. Check the monitor modes, turn off dynamic contrast, and all other post process features, like sharpen, things of that sort.
you’re using the colormunki “display” right ? the one that looks like the i1disp…[Read more]
I used your recommendation of rec2020 / p3 as input space when creating the 3dlut for Madvr. Output is SDR using madvr’s hdr->sdr shader.
The Gamut space of the monitor is P3
For rec2020 as input, it’s posterizing blue, as in the dolphins scene, p3 works fine
For P3 as input, it’s posterizing red, in the exmachina scene. re…[Read more]
You can not calibrate this monitor with spyder4express. The black lvl reading is completely wrong and too high. This is a VA panel, it should be near 3000:1 contrast ratio, that probe is only measuring 434 :1.
You need a colormunki display (xrite) probe at the very least. They go on sale for $80-100
asdfage wegagag replied to the topic Windows 10 1903 (May 2019 update) issues and fixes PLEASE READ in the forum Help and Support 5 months ago
Hi Florian, does this banding issue affect Color managed apps negatively (unpredictably) such as photoshop and Madvr (mpchc) ?
Do you recommend going back to older versions of windows or even windows 7 for more reliable Color ?
How do experts such as yourself setup their color environment for reliability and immunity towards anomalies such as…[Read more]
- Load More