Home › Forums › Help and Support › Windows 10 Nvidia card settings?
- This topic has 2 replies, 2 voices, and was last updated 8 years, 1 month ago by Michal.
-
AuthorPosts
-
2016-02-27 at 3:51 #2029
Hi,
did my first calibration quickly, but now I would like to do this more properly, for my hobbies video editing.
I did go to card settings and would like to confirm/advice on the parameters to be correct.DISPLAY: Change Resolution
http://s29.postimg.org/ctdjvucrr/DISPLAY_Resolution.png
YCbCr444 or RGB?
10bpc or 8bpc -the video will be 8bpc but I read somewhere that editing is better under 10bpc environment.DISPLAY: Colour settings
http://s7.postimg.org/vqpvch34b/DISPLAY_Desktop_Colou_Settings.png
That’s all by default, however should I leave it at default or go for 2.2 or 2.4 ?
VIDEO: Video Image settings
http://s8.postimg.org/7snq49nk5/VIDEO_Adjust_Video_Image.png
That at default I suppose.
VIDEO: Colour settings
http://s13.postimg.org/c2y6zkcl3/VIDEO_Colour_Colour.png
At default again.
VIDEO: Gamma
http://s15.postimg.org/6z3fgom8b/VIDEO_Colour_Gamma.png
Again should I change to 2.2-2.4 or just leave this?
VIDEO: Dynamic range
http://s9.postimg.org/wjz97j9ov/VIDEO_Colour_Range.png
Full or limited?
How Display settings affect video?
Also, DCG gives me correction options for Spyder5 as follow:
http://s30.postimg.org/z9i188av5/Corrections.png
What should I choose for my Samsung U28D590D display? All I know about it, it is:
LED edge-lit:
Screen Size 28″
Aspect Ratio 16:9
Panel Type TN
BLU Type LED
Brightness (Typical) 370cd/m2
Contrast Ratio 1000:1 (Typ)
Dynamic Contrast Ratio Mega ∞
Resolution 3840×2160
Response Time 1 (GTG)
Viewing Angle (H/V) 170°/160°
Color Support 1BAlso I will try to calibrate my Samsung plasma TV Series 8 60inch (PS60E8000), so what settings and correction should I choose for that?
Product PDP
Screen Size 60
Resolution 1920 x 1080
Real Black Yes
Clear Image Panel Yes
Wide Colour Enhancer Yes
600Hz Subfield Motion Yes
Digital Noise Filter YesThanks a lot,
Michal2016-02-27 at 17:25 #2036Hi,
as always, a lot of this depends on the specific display. I.e. YCbCr444 or RGB, 10bit/8bit etc., you’ll have to figure out for your specific display (10bit should be superior in theory, but on some displays this may not work).
DISPLAY: Colour settings
VIDEO: Video Image settings
VIDEO: … etc.Don’t change these (leave at default and/or set to “application controlled”)
What should I choose for my Samsung U28D590D display?
Choose “White LED” under measurement mode (correction will be “None”).
Also I will try to calibrate my Samsung plasma TV Series 8 60inch (PS60E8000), so what settings and correction should I choose for that?
Here you can choose the “Spectral: Plasma” correction (measurement mode should be “Refresh”).
Digital Noise Filter Yes
You can probably turn that off.
2016-02-28 at 5:13 #2039Thank you Florian, I will play with this later on.
Michal -
AuthorPosts