Uniformity test in external display

Home Forums General Discussion Uniformity test in external display

Viewing 1 post (of 1 total)
  • Author
  • #3859

    • Offline


    We can run an uniformity test in the display attached to the computer, but not to an external display, like, for example, one connected through webserver.

    Well, we can run it anyway, and it gives apparently correct results, with a white background in the external device, clicking the parts of the display in the computer. But the gamma test? that is ran in the square selected is not ran in the external device.

    My suggestion is to let the user run the uniformity test in an external device, attaching it like when running a normal test (connecting to 192.168.1…) and then, using the actual interface of squares to select the position where the colorimeter is in the tested device, running the gamma-grayscale test in fullscreen in the device.

    Thank you very much! If I have not explained it well, please let me know.

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.

Log in or Register

Display Calibration and Characterization powered by ArgyllCMS