- This topic has 1 reply, 2 voices, and was last updated 8 years, 1 month ago by
.
-
Posts
-
Hi, I was testing Calman and found very interesting that have an option to trigger multiple readings under certain cd/m by default 20. And it does by default 10 reads I think but it can set to do up to 30. This seems to make the accuracy of low level much better. At least when testing it I get values that are consistent over and over and with single reads it always get diffent values under 20 cd/m both with ColorMunki and Spyder 4.
Does yiur software have a similar option?
As I understand it, Calman employs a fixed integration time multiple readings approach. Argyll CMS on the other hand by default uses an integration time that is varied according to the light level of the measured sample, and in some cases (depending on the instrument) where this is not possible, it averages multiple readings over a similar period of time instead (an example of this would be the way Argyll drives the Klein K-10a if I’m not mistaken).
K10-A on Amazon
Disclosure: As an Amazon Associate I earn from qualifying purchases.
