madvr 3dlut full rgb 0-255

Home Forums Help and Support madvr 3dlut full rgb 0-255

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #35463

    Panos Pavlatos
    Participant
    • Offline

    Good afternoon,

    driver set up 0-255,rgb full

    madvr setup 0-255,rgb ful

    oled set up  0-255,rgb full

    Crretaing the 3dlut for madvr, the only option ( inputing encoding) is 16-235.

    Could you advise what  is the  problem.

    THans,in advance.

    #35464

    Vincent
    Participant
    • Offline

    There is no problem. Content is 16-235, LUT3D should be 16-235. Then MadVR will scale result to whatever you have configured (0-255 in your configuration).

    In the same way IRIDAS .cube for DWMLUT should be 0-255 regardless of your configuration beacuse win desktop composition is full range. Then , at a later stage GPU driver will configure & scale output to whatever your configuration is (full or limited).

    #35466

    Panos Pavlatos
    Participant
    • Offline

    Thank you.

    #38150

    Дмитрий Мышков
    Participant
    • Offline

    How do I add my own lut file for madvr?
    I went all over the Internet and read the documentation for the program – only embedded tables, it turns out?

    #38156

    Panos Pavlatos
    Participant
    • Offline

    madvr-devices-your device-calibration-calibrate this dissplay by using external 3dlut files

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.

Log in or Register

Display Calibration and Characterization powered by ArgyllCMS