Instrument Access Failed

Home › Forums › Help and Support › Instrument Access Failed

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2016-09-08 at 3:37 #3993

    mriley52
    Participant
    • Offline

    Updated DisplayCal and now It does not see my Colormunki

    Attachments:
    You must be logged in to view attached files.
    2016-09-08 at 13:03 #3995

    Florian Höch
    Administrator
    • Offline

    Instrument access happens through Argyll CMS, so unless you updated that as well there’s nothing in the software that would influence if the instrument can be accessed or not. In case you didn’t use the software for a while, there’s probably other things that have changed on the system that can influence instrument access. Make sure the ColorMunki is listed in device manager under “Argyll libUSB-win32 devices” and has no exclamation mark next to it.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.

Log in or Register

Display Calibration and Characterization powered by ArgyllCMS