-
If 2.4 gamma sdr is for dark rooms, then how do you watch hdr movies with gamma st.2084 which is almost like a 2.2 relative gamma…
Because they are encoded that way?
Menelaos, you have a very smooth greyscale going up in gamma very little. It is good and I agreed with Vincent. If you like you can try a higher quality setting and see what gamma it gives for the top 10%.
Others its a .07 cd m2 rounded difference at 5%. HCFR 100 brightness and .1 blackpoint. How do I get .206 cdm2 at 5% when 0% is 0.273 cdm2 in blue and red and green is .101cdm2 ? I go by eyes in a greyscale pattern in black level to set blue RGB 5%. I try to follow Displaycal and it sets 5% RGB Red to 0.287, Green to 0.279 and Blue is 0.394. It looks better than defaults and grey scale in black levels has no tints.
There is a standard for SDR. It’s BT.1886. Which is basically 2.4. The standard also calls for a dim (5-nit) environment. If you’re watching in a bright environment, you should use 2.2. But if you’re a professional colorist working in a grading suite (5-nit), you use 2.4. It’s the standard
BT.1886 is 2.4 if the black level is 0, then and only then it will be 2.4. BT.1886 on ips panel with 1000:1 is very close to 2.2 gamma.
Yes, BT.1886 is *exactly* 2.4 only when the display is capable of true black. That’s why I said, “basically.” But it is always based on 2.4. The only difference is it rises out of black faster on other displays. It is never “close to 2.2 gamma.” Read the standard
Display Calibration and Characterization powered by ArgyllCMS